㩷
Serial (RS-232C) (GH20 model only)
1.㩷 Connect the serial interface cable to the
2. 㩷 Connect the other end of the serial interface | |
cable to the host. | Interface Cable |
|
3. 㩷 Turn on the printer and the host, and send data from the host to the printer.
NOTE:
For details of the interface cable, please consult the nearest TOSHIBA TEC representative.
Wireless (GH30/GH40 model only)
1.㩷 In the case of Bluetooth, place the printer within 3 m from the host.
In the case of wireless LAN, place the printer within a wireless coverage area.
2.㩷 Turn on the printer and the host, and send data from the host to the printer.
NOTE:
ξPlease be sure to read “Precautions for Handling of Wireless Communication Devices” before operating the printer.
ξConfirm that there is no obstacles between the printer and the host. Obstacles may cause a communication failure.
The radio connectivity is affected by the operating environment. Especially, metal obstacles, metal powder, or locations enclosed by metal walls may prevent proper communication.
For the installation location of access points, please consult the nearest TOSHIBA TEC representative.
PC
Handy Terminal
[Bluetooth]
PC
Access Point
Handy Terminal
[Wireless LAN]
27
