
Media Guide Roller and Strip Shaft
Wipe clean the Media Guide Rollers with a soft cloth moistened with absolute ethyl alcohol while rotating the rollers.
Wipe clean the strip shaft with a soft cloth slightly moistened with absolute ethyl alcohol.
Clean the strip shaft of the linerless label kit in the same way. Cleaning should be performed each time one or two media rolls are used up
Media Sensor Window and Media Path
Remove dust or dirt from the Media Sensor Window with a commercially available soft, dry brush.
Wipe clean the Media Path with a soft dry cloth.
When linerless labels are used, wipe off dirt of residual glues from the Media Guides each time one or two media rolls are used up.
Top Cover, Operation panel, and IrDA Window
Wipe clean the cover, operation panel, and IrDA window with a soft dry cloth slightly moistened with absolute ethyl alcohol.
Remove any dirt or residual glues from the media outlet with a cotton swab slightly moistened with absolute ethyl alcohol.
When linerless labels are used, wipe off dirt of residual glues from the Top Cover or Media Outlet each time one or two media rolls are used up.
Media Guide Roller
Strip Shaft
Media Sensor Window
Media Path
Media Outlet
Top Cover
IrDA Window
Operation Panel
15