Before using a peel-off unit
㩷
When issuing labels in the peel-off mode, pull out the peel-off roller before loading a label roll.
1.Open the Top cover, and push the Peel-off Cover by the Ÿ marks with your thumbs in the direction of the arrow.
Peel-off Roller Cover
2.Pull out the Peel-off Roller until the both edges completely come out with a click
Refer to “Loading the Media” on the previous page and set a label roll.
Peel-off Roller
Peel-off Roller Cover
NOTES:
1.For the B-EP4DL series, DO NOT PULL the center of the Peel-off roller hard. Doing so may break the Peel-off roller.
2.Do not forcibly pull out the Peel-off roller or push it into the printer, otherwise the Peel-off roller may break.
How to put back the Peel-off Roller
1.Slightly hold down the Peel-off Roller Cover, and insert the Peel-off Roller under the Peel-off Roller Cover.
Peel-off Roller
Peel-off Roller Cover
2.Hold down the Peel-off Roller Cover, push it into the printer in the direction indicated by the arrow until it clicks.
Peel-off Roller Cover
