Applications and multimedia

Applications and multimedia

78

Capturing a video

To capture a video:

1.Start the Camera.

2.Press the Right softkey, then select Video.

3.Aim the camera at the subject, then press the Navigation/Action key or Camera key to start recording the video.

4.Press the Navigation/Action key or Camera key to stop recording the video.

Camera menu items

Video - to capture videos.

Still - to capture photographs.

Mode - the mode to use when capturing photographs. The following options are available:

Normal - default, to capture a single photograph

Burst - to capture a series of pictures (approximately one or two per second). This feature is useful for capturing a photograph of a subject in motion.

Timer - to capture a photograph after approximately 4 or 5 seconds). This feature is useful for capturing a photograph that you can be in.

Brightness - to set the brightness.

Resolution - to set the resolution for photographs.

n NOTE: Images of higher quality will use more storage space.

Quality - to set the picture quality when capturing a video.

Zoom - to select a zoom level. The options available will depend on the size of the picture.

White Balance - to optimise photographs and videos for the current ambient light. If you are unsure of which option to select, the Automatic (default) option should be used.

Flash - to set the camera flash to On or Off.

Full Screen - to set the camera to use the full screen.

Options... - to access settings for the Pictures & Videos application. These include the setting for the time limit of captured videos.