Using ConfigFree™ with your Toshiba Computer

231

 

ConfigFree Utilities

 

 

 

 

 

 

NOTE

Because the wireless LAN’s default connection setting is for Ad Hoc

 

mode, the Toshiba Wireless Projector will not connect if the projector

is set to Infrastructure mode. If this occurs, you can change the wireless LAN’s connection setting to Infrastructure mode to match the settings on the projector.

(Sample Image) Projector icon when connected with Quick Connect

If the wireless mode for the wireless setting is set for 5 GHz (802.11a), Quick Connect changes this mode to 2.4 GHz (802.11b) and then connects to the projector.

The wireless LAN configuration returns to the settings that were last used before the Quick Connect function was started:

If the Toshiba Wireless Projector utility is closed.

If you select Toshiba Wireless Projector (DPJ) from the ConfigFree tray menu (this disconnects the wireless LAN connection).

If you select a profile from the ConfigFree tray menu or when you disable a wireless device.

If you close ConfigFree.

Direct Link Toshiba Device

When Access Point is not available, use the Direct Link Toshiba Device feature to connect your computer in Ad Hoc (peer-to-peer) mode and use the Summit feature.

Page 231
Image 231
Toshiba GMAD00134010 manual 231, Direct Link Toshiba Device