Toshiba GMAD00134010 manual Another, you must remove the top module first before

52	Getting Started
	Adding memory (optional)

7Remove the memory module slot cover.

8Place the screws and the cover in a safe place so that you can retrieve them later.

Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up.

Avoid touching the connector on the memory module or on the computer. Grease or dust on the connector may cause memory access problems.

9Carefully remove the new memory module from its antistatic packaging, without touching its connector.

10Locate an empty memory module slot on the underside of the computer.

NOTE	If no memory slot is available, you must remove a module by
	performing steps 2-3 of “Removing a memory module” on page 55.
NOTE	If your system has the memory modules stacked on top of one
	another, you must remove the top module first before
	removing/installing the bottom module.
NOTE	For this model, Slot A is the bottom slot. Slot B is the top slot. If only
	one memory module is to be installed, it must be installed in slot A.

11Pick up the memory module by its sides, avoiding any contact with its connector. Position the module toward the socket,