Toshiba GMAD00134010 manual Fingerprint Management, Control Center, Settings

	Utilities	161
	Fingerprint Authentication Utility
NOTE	Your hardware must support Power-on security to use the single
	logon feature. You must have administrative privileges to change
	settings.

To enable power-on security single logon:

1Open the Control Center and go to Settings - System Settings.

2Check the Allow power-on security single sign-on check box. (Logon support must be enabled for this option to be accessible.)

Fingerprint Management

Fingerprints are stored in memory during enrollment. After a fingerprint is enrolled, it is displayed with a power-on button above it. The button appears “pressed in” by default, indicating that the corresponding finger will be used for power-on security. If you do not want to use a fingerprint for power-on security but only for logon, click the Boot button to delete the fingerprint from the fingerprint device memory.

The fingerprint device memory can typically hold up to 21 fingerprints. The number of slots remaining is displayed in the enrollment wizard.

Control Center

The Control Center contains various functions for fingerprint management and for setting up your fingerprint software. Available options depend on the software status, used hardware, and installed applications.

(Sample Image) Main Fingerprint Control Center Window