Toshiba L43, W43 user manual There are 3 methods for Wireless Setup, To cancel searching for the AP

English

SETTING UP YOUR TV

There are 3 methods for Wireless Setup:	- TKIP/AES: 8-63 ASCII or 64 Hex characters
• Easy Setup (WPS) - If the AP supports WPS,	- WEP: 5 or 13 ASCII or 10 or 26 Hex characters
	• There is only one key ID to set for WEP
this method can be used. WPS is an industry
standard designed to make connection of	encryption.
wireless LAN equipment and security setup	Press B / b to highlight Done and press OK.
easy. WPS will automatically configure all
wireless settings.	NOTE:
NOTE: WEP encryption may not be able to	• If Network Name is not displayed, see Manual
	Setup below to set Network Name before Done
configured by easy setup.
	is selected.
• Assisted Setup - follow step 11.
	• If BACK is pressed before Done is selected,
Input the Security Key only.	settings are not saved.
• Manual Setup, skip to step 12.	When the message “Wireless configuration is
Input the all settings.
NOTE: EXIT is available during settings.	complete.” appears on screen, press OK.
	The screen will skip to step 13.
j In step 9, when you select Easy Setup;	l In step 9, when you select Manual Setup;
Press BbC c to highlight Next and press OK.	Press BbC c to highlight Next and press OK.
The Easy Setup screen will appear.	The Manual Setup screen will appear. Press B /
Press c and B / b to select PBC (Push Button	b to select Network Name and press OK.
Configuration) or PIN (Personal Identification	The Software Keyboard window will appear (page
Number) and press OK.	44).
Press b to highlight Start Scan and press OK.	Input the Network Name by using the Software
PBC - Following the on-screen instructions, push	Keyboard. To save your setting, press the GREEN
	button.
the appropriate button on your AP. When a window
reporting that the setup is complete appears, press	Press B / b to select Authentication and then
OK.	press c and B / b to select Open System,
PIN - When the PIN code window appears, enter	Shared Key, WPA-PSK or WPA2-PSK. Press
	OK.
the displayed PIN into your AP, and then press OK
to continue the PIN Setup. When a message	Press B / b to select Encryption, and then press
displays to report that the setup is complete, press	c and B / b to select None, WEP, TKIP or AES.
OK.	Press OK.
To cancel searching for the AP:	NOTE:
Press BACK while searching for the AP. A message will	• Certain encryption types are only compatible
	with specific authentication types.
appear, and then press C / c to select Yes and press OK.
	- When Authentication is Open System, only
k In step 9, when you select Assisted Setup;	WEP or None is compatible.
	- When Authentication is Shared Key, only WEP
Press BbC c to highlight Next and press OK.	is compatible.
	- When Authentication is WPA-PSK or WPA2-
The Assisted Setup screen will appear.
	PSK, only TKIP or AES is compatible.
Press B / b to select the desired AP and press
	• When incompatible Authentication/Encryption
OK.
	pairings are detected, a warning message will be
NOTE: Check the MAC address on the label of the	displayed, and no connection attempt will be
	made until the incompatibility is resolved.
AP or in the manual, and select your AP.
	• There is only one key ID to set for WEP
Press B / b to select Security Key and press OK.
	encryption.
The Software Keyboard window will appear (page	Press B / bto select Security Key and press OK.
44).
Input the Security Key by using the Software	Input the Security Key by using the Software
	Keyboard (page 44).
Keyboard. To save your setting, press the GREEN
	To save your setting, press the GREEN button.
button.
NOTE:	This item is greyed out when Encryption is None.
• The Security Key must adhere to these
conditions:

16