23
English
SETTING UP YOUR TV
ATV Manual Tuning
The television can be tuned-in manually using ATV
Manual Tuning. For example, you might use the feature
if the television cannot be connected to a media recorder/
decoder with a SCART lead or when you want to tune-in a
station on another System.
Use C/c to move across the screen and select any of the
ATV Manual Tuning options.Then use B/b to adjust the
settings.
1Position
The number to be pressed on the remote control to
tune the channel.
2System
Specific to certain areas.
3Colour System
Factory set to Auto, should only be changed if
problems are experienced, i.e. NTSC input from
external source.
4Skip
Set Skip to On (8) or Off (() for the selected
channel. See page 24.
5Signal Class
The channel classification.
6Channel
The channel number on which a station is being
broadcast.
7Search
Search up and down for a signal.
8Manual Fine Tuning
Only used if interference/weak signal is experienced.
See page 84.
9Station
Station identification. Use the Bb and Cc buttons to
enter up to seven characters.
To allocate a position on the television for a decoder and
media recorder: turn the decoder on, insert a pre-recorded
film in the media recorder, press PLAY and manually tune.
aIn the Channel Tuning menu, press b to select
ATV Manual Tuning and press OK.
bPress B/b to select the desired position. We
suggest Pos. 0 for a media recorder.
cPress OK to select. If the channel chosen for the
media recorder is set to skip, Skip should be
removed before storing.
dPress c to select System and press B/b to
change if required.
eThen press c to select Search.
fPress B/b to begin the search. The search
symbol will flash.

Tuning

IA
1C20C
V R
123 4 65 7 8 9
ATV Manual Tuning
System
Different Channel numbers may be displayed.
Ant/Cable/Satellite
Satellite Settings
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
< Channel Tuning
0C2
1S10
2C7
3S40
4C22
5C25
6C28
7C30
ATV Manual Tuning
Pos. Channel Station
IA
1C20
ATV Manual Tuning
System
IA
1C20
ATV Manual Tuning
Search