Toshiba M400 Wireless communications, Wi-Fi, Wake-up, Wireless LAN, Disconnecting, Card Power Management, ■Card Power Management, ■Wi-FiProtected Access (WPA)

Operating Basics

DisconnectingTo disconnect the internal modular cable, follow the steps below.

1.Pinch the lever on the connector in the telephone jack and pull out the connector.

2.Disconnect the cable from the computer’s modem jack in the same manner.

Wireless communications

The computer’s wireless communication function supports both Wireless LAN and Bluetooth devices.

All models are provided with Wireless Communication switch. Some models are equipped with both Wireless LAN and Bluetooth functions.

Wireless LAN

The Wireless LAN is compatible with other LAN systems based on Direct Sequence Spread Spectrum /Orthogonal Frequency Division Multiplexing radio technology that complies with IEEE802.11 Wireless LAN standard (Revision A, B or G).

Do not install or remove an optional memory module while Wake-up on Wireless LAN is enabled.

■The Wake-up on Wireless LAN function consumes power even when the system is off. Leave the AC adaptor connected while using this feature.

■The Wake-up on Wireless function is effective only when it is connected with Access Point. This function becomes invalid when the connection is cut.

■Theoretical maximum speed: 54Mbps (IEEE802.11a, 802.11g)

■Theoretical maximum speed: 11Mbps (IEEE802.11b)

■Frequency Channel Selection (Revision A: 5 GHz, Revision B/G: 2.4 GHz)

■Roaming over multiple channels

■Card Power Management

■Wired Equivalent Privacy (WEP) data encryption, based on the 128 bit encryption algorithm.

■Wi-Fi Protected Access (WPA).

■Advanced Encryption Standard (AES) data encryption.

■Wake-up on Wireless LAN (Intel module type).

User’s Manual 4-43