Power and Power-Up Modes

The Battery indicator may show a rapid decrease in battery operating time when you try to charge a battery under the following conditions:

■The battery has not been used for a long time.

■The battery has completely discharged and been left in the computer for a long time.

■A cool battery is installed in a warm computer.

In such case, follow the steps below.

1.Fully discharge the battery by leaving it in the computer with the power on until the power automatically shuts off.

2.Connect the AC adaptor to the DC IN 15V jack of the computer, and the AC adaptor into power outlet.

3.Charge the battery until the Battery indicator glows green.

Repeat these steps two or three times until the battery recovers normal capacity.

Monitoring battery capacity

Remaining battery power can be monitored using the following methods.

■Clicking the battery icon on the task bar

■Via the Battery Status in the Windows Mobility Center window

■You should wait at least 16 seconds after turning on the computer before trying to monitor the remaining operating time. This is because the computer needs this time to check the battery's remaining capacity and then calculate the remaining operating time, based on this together with the current power consumption.

■Please be aware that the actual remaining operating time may differ slightly from the calculated time.

■With repeated discharges and recharges, the battery's capacity will gradually decrease. In view of this it will be noted that an often used, older battery will not operate for as long as a new battery even when both are fully charged.

User’s Manual

6-11