Toshiba MK1032GAX 11.8.41 SECURITY DISABLE PASSWORD

11.8.41 SECURITY DISABLE PASSWORD					(F6h)
	COMMAND CODE			1 1 1 1 0 1 1 0	REGISTER
		REGISTER SETTING			NORMAL COMPLETION
	DR		DRIVE No.		no change
	CY				no change
	HD				no change
	SN				no change
	SC				no change
	FT				no change

This command can be executed only when the drive is in unlocked mode. When the drive is in locked mode, the drive rejects the command with an Aborted command error.

The SECURITY DISABLE PASSWORD command requests a transfer of a single sector of data from the host including the information specified in the following table. Then the drive checks the transferred password. If the user password or the Master password match the given password, the drive disables the lock function. This command does not change the Master password which may be reactivated later by setting a user password.

		Security Disable Information
Word		Content
0	Control word
	Bit 15-1	Reserved
	Bit 0	Identifier 0=compare user password
		1=compare master password
1-16	Password (32 bytes)
17-255	Reserved

Toshiba Corporation Digital Media Network Company

Page 102 of 159

© 2004, Copyright TOSHIBA Corporation All Rights Reserved