BYTE 362: Off-line data collection status

Value Definition

00h or 80h Off-line data collection activity was never started.

01h Reserved

02h or 82h Off-line data collection activity was completed without error.

03h or 83h Off-line activity in progress.

04h or 84h Off-line data collection activity was suspended by an interrupting command from host.

05h or 85h Off-line data collection activity was aborted by an interrupting command from host.

06h or 86h Off-line data collection activity was aborted by the device with a fatal error.

07h-FFh Reserved

BYTE 363: Self-test execution status

The self-test execution status byte reports the execution status of the self-test routine.

Bits 0-3 (Percent Self-Test Remaining) The value in these bits indicates an approximation of the

 

percent of the self-test routine remaining until completion in ten percent increments. Valid values

are

 

0 through 9.

A value of 0 indicates the self-test routine is complete. A value of 9 indicates

90% of

 

total test time remaining.

 

 

 

Bits 4-7 (Self-test Execution Status) The value in these bits indicates the current Self-test

Execution

 

Status .

 

 

 

 

 

Self-test execution status values

 

 

 

Value

Description

 

 

 

0

The previous self-test routine completed without error or no self-test has ever been run

 

 

1

The self-test routine was aborted by the host

 

 

 

2

The self-test routine was interrupted by the host with a hard or soft reset

 

 

 

3

A fatal error or unknown test error occurred while the device was executing its self-test

 

 

 

routine and the device was unable to complete the self-test routine.

 

 

 

4

The previous self-test completed having a test element that failed and the test element

 

 

 

that failed is not known.

 

 

 

5

The previous self-test completed having the write element or the electrical element of

 

 

 

the test failed.

 

 

 

6

The previous self-test completed having the servo (and/or seek) test element of the

 

 

 

test failed.

 

 

 

7

The previous self-test completed having the read element of the test failed.

 

 

 

8-14

Reserved.

 

 

 

 

 

 

 

 

15

Self-test routine in progress.

 

 

 

 

 

 

 

BYTE 364-365: Total time

 

 

 

The time for off-line data collection operation ( sec.)

 

 

BYTE 366: Reserve

 

 

BYTE 367: Off-line data collection capability

 

 

 

bit 0 (Execute off-line immediate implemented bit)

 

 

 

bit0 = 1 SMART EXECUTE OFF-LINE IMMEDIATE command supported.

 

 

 

bit0 = 0 SMART EXECUTE OFF-LINE IMMEDIATE command NOT supported

 

 

 

This bit

is set to 1

 

 

bit 1 (enable/disable automatic off-line implemented bit)

bit0 = 1 SMART ENABLE/DISABLE AUTOMATIC OFF-LINE command supported.

Toshiba Corporation Digital Media Network Company

Page 106 of 159

© 2004, Copyright TOSHIBA Corporation All Rights Reserved