Toshiba MK1032GAX 11.8.31.2 Set Max Set Password, 11.8.31.3 Set Max Lock

11.8.31.2 Set Max Set Password

F9h with the content of the Features register equal to 01h.

COMMAND CODE			1 1 1 1 1 0 0 1	REGISTER
	REGISTER SETTING			NORMAL COMPLETION
DR		DRIVE No.		no change
CY				no change
HD				no change
SN				no change
SC				no change
FT			01 H	no change
LBA				no change

This command is not immediately preceded by a READ NATIVE MAX ADDRESS command. If this command is immediately preceded by a READ NATIVE MAX ADDRESS command, it shall be interpreted as a SET MAX ADDRESS command.

This command requests a transfer of a single sector of data from the host. Table 11.8-7 defines the content of this sector of information. The password is retained by the device until the next power cycle. When the device accepts this command the device is in Set_Max_Unlocked state.

Table 11.8-7 SET MAX SET PASSWORD data content

Word	Content
0	Reserved
1-16	Password (32 bytes)
17-255	Reserved

11.8.31.3 Set Max Lock

F9h with the content of the Features register equal to 02h.

COMMAND CODE			1 1 1 1 1 0 0 1	REGISTER
	REGISTER SETTING			NORMAL COMPLETION
DR		DRIVE No.		no change
CY				no change
HD				no change
SN				no change
SC				no change
FT			02 H	no change
LBA				no change

This command is not immediately preceded by a READ NATIVE MAX ADDRESS command. If this command is immediately preceded by a READ NATIVE MAX ADDRESS command, it shall be interpreted as a SET MAX ADDRESS command.

The SET MAX LOCK command sets the device into Set_Max_Locked state. After this command is completed any other SET MAX commands except SET MAX UNLOCK and SET MAX FREEZE LOCK are rejected. The

Toshiba Corporation Digital Media Network Company

Page 94 of 159

© 2004, Copyright TOSHIBA Corporation All Rights Reserved