Toshiba P100, P105 Removing a disc with the computer on, Removing a disc with the computer off, 1Press the eject button on the drive, Gently press the tray in to close it

100	Learning the Basics
	Using the optical drive

Removing a disc with the computer on

To remove a compact disc (CD or DVD) with the computer turned on:1Press the eject button on the drive.

Do not press the eject button while the in-use indicator light is glowing. Doing so could damage the disc or the drive.

Also, if the disc is still spinning when you open the disc tray, wait for it to stop spinning before you remove it.

2Pull the tray out until it is fully open, remove the disc, and place it in its protective cover.

3Gently press the tray in to close it.

Removing a disc with the computer off

To remove a disc with the computer turned off:

1Insert a slender object, such as a straightened paper clip, into the manual eject hole.

The disc tray slides partially out of the drive (about 1 inch).

Never use a pencil to press the manual eject button. Pencil lead can break off inside the computer and damage it.

2Pull the tray out until it is fully open, remove the disc, and place it in its protective cover.

3Gently press the tray in to close it.