Using ConfigFree™ with your Toshiba Computer

255

Using the Automatic Switch

Using the Automatic Switch

The Automatic Switch feature allows the computer to automatically switch profiles the next time it is powered on. This feature is particularly useful if you want your computer to automatically switch from the network configuration you use in your office to the one you use at home.

The Auto Switch feature contains options for automatically switching between wired and wireless devices. With these options, the computer automatically switches to a wireless LAN network when the cable of the wired LAN network is removed from the computer. When the cable is reconnected, the connection to the wired LAN is re-established.

To use the Automatic Switch feature:

1Right-click the icon in the system tray.

2Click Auto Switch. The Auto Switch dialog box appears.

3Check Enable Wireless when cable disconnect occurs.

4Click OK.

NOTE

If your computer is connected to multiple wireless LAN

 

devices, the Auto Switch (SSID) feature is disabled. To enable

 

this feature, only one wireless LAN device can be used.

 

 

Semi-Automatic Switch Feature

The Semi-Automatic feature alerts you when the computer connects to a Service Set Identifier (SSID) stored in a profile, When the computer connects to the designated SSID, a notification window appears. You can then click this window to connect using the settings specified in the profile.

To use the Semi-Automatic Switch feature:

1Right-click the icon in the system tray.