Toshiba P30 manual Removing the Optical Drive Module, Installing the Optical Drive Module

4 Replacement Procedures

4.5Optical Drive Module

Removing the Optical Drive Module

To remove the optical drive module, you need to remove the HDD unit first. Follow the steps below:

1.Turn the computer upside down.

2.Remove one M2.5x5 screw securing the optical drive module into place.

3.Slide the optical drive module from the bay, if necessary inserting your finger through the HDD slot and pushing it out.

Figure 4-7 Removing the optical drive module

Installing the Optical Drive Module

To install a device in the optical drive module bay, follow the steps below and refer to the figure in the preceding section.

1.Slide the device into the optical drive module bay.

2.Use one M2.5x5 screw to secure it in position.

4-12 Satellite P30 Series Maintenance Manual