Toshiba P30 manual System Unit Hardware Overview

1.2 System Unit 1 Hardware Overview

•LFBGA 169-ball package

•PCI Interface

•Compliant with PCI Local Bus Specification Revision 2.3

•Compliant with PCI Bus Power Management Interface Specification Revision 1.1

•Compliant with PCI Mobile Design Guide Version 1.1

•Compliant with Advanced Configuration and power Interface Specification Revision 1.0

•Card Bus Interface

•Compliant with PC Card Standard 8.0

•Supports Standardized Zoomed Video Register Model

•Supports SPKROUT CADIO and RIOUT#

•Secure Digital Interface

•Compliant with SD Host Controller Standard Specification Version 1.0

•Supports SD Suspend/Resume Funcationlity

•Supports DMA Mode to Minimize CPU Overhead

•Supports High Speed with the SD Clock Frequency UP to 50Mhz

•Contain two 512-byte buffer to maximize the transfer speed

•Supports Traffic LED Light

•Supports Over Current Protection

•Memory Stick Interface

•Compliant with Memory Stick PRO Format Specification Version 1.0

•Supports 4-bit Parallel Data Transfer Mode

•Memory Stick Clock Frequency UP to 40Mhz

•Supports DMA Mode to Minimize CPU Overhaed

•Supports Traffic LED Light

•Supports Over Current Protection

•Smart Media Interface

•Compliant with SmartMedia Standard 2003

•Supports Hardware EDD (1-bit correction and 2- bits detection) Generation

•Supports DMA Mode to Minimize CPU Overhead

•Supports Traffic LED Light

•Interrupt Configuration

•Supports Parallel PCI Interrupts

•Supports Parallel IRQ and Paralle PCI Interrupts

•Supports Serialized IRQ and Parallel PCI Interrupts

•Supports Serialized IRQ and PCI Interrupts

•Power Management Control Logic

•Supports CLKRUN# protocol

•Supports SUSPEND#

•Supports PCI PME# from D3, D2, D1 and D0

•Supports PCI PME# from D3Cold

•Supports Zoomed Video Port

•Supports Parallel 4-wire Power Switch Interface

Satellite P30 Series Maintenance Manual 1-7