Toshiba P30 manual Touch Pad, Removing the Cover

4 Replacement Procedures

4.13 Touch Pad

Removing the Cover

To remove the Touch Pad, first remove the top cover, then follow the steps below:

1.Remove the two black M2.5x3 screws securing Touch Pad LED board FFC cable to the Touch Pad, and then detach it.

Note: One screw is under the mylar flap.

2.Remove one M2.5x3 screw securing the Touch Pad Bracket and then slide it out.

Figure 4-24 Removing the Touch Pad LED board

Satellite P30 Series Maintenance Manual 4-31