Toshiba P30 manual Disassembling the Optical Drive, Reassembling the Optical Drive

4 Replacement Procedures

4.6Optical Drive

This computer may be fitted with a:

CD-RW/DVD-ROM device DVD-ROM device DVD-R/-RW device DVD+-R/+-RW

DVD Super Multi device

Disassembling the Optical Drive

To disassemble the optical drive, then follow the steps below.

1.Remove one M2.5x5 screw and slide the optical drive module from the bay.

2.Remove two M2x3 screws from the bracket plate. Remove the bracket plate.

Figure 4-8 Removing the optical drive bracket

Reassembling the Optical Drive

To reassemble an optical drive, follow the steps below and refer to the figure in the preceding section.

1.Position the optical drive bracket plate to the rear panel of optical drive.

2.Secure the optical drive bracket plate with two black M2⋅3 screws.

3.Install the optical drive module into the bay and secure with one M2.5x5 screw.

Satellite P30 Series Maintenance Manual 4-13