|
|
| FILE NO. |
|
|
|
|
No. | Part name | Procedures | Remarks |
|
|
|
|
„ | Evaporator | 7) Unscrew one screw which fix Electrical |
|
| (Heat exchanger) | Control Box and the casing. Move |
|
|
| Electrical Control Box until can see one |
|
screw that fix Motor band and unscrew it then remove
Screw
Screw
Tighten the screw of Motor band, |
|
assembly Electrical Control Box then |
|
tighten screw to complete reassembly. | Motor band |
Screw
… Bearing base | 1) | Follow to the procedure in the item „. |
| 2) | Remove the two screws used to secure |
|
| the bearing base. |
Two screws
3) Remove the bearing base.
<Caution at assembling>•If the bearing is out from the housing, push it into the specified position and then incorporate it in the main body.
Bearing
Bearing base
– 97 –