|
|
| FILE NO. |
|
|
|
|
No. | Part name | Procedures | Remarks |
|
|
|
|
l | Horizontal louver | 1) Remove shaft of the horizontal |
|
|
| louver from the back body. |
|
|
| (First remove the left shaft, and |
|
|
| then remove other shafts while |
|
|
| sliding the horizontal louver |
|
|
| leftward.) |
|
|
|
|
|
„ Evaporator | 1) | Follow to the procedure in the item ƒ. |
(Heat exchanger) | 2) | Remove the pipe holder from the rear side of the main unit. |
| 3) | Remove two fixing screws at the left side of the end plate of the heat exchanger. |
|
| 2 screws |
4) Remove one fixing screw on the | Heat exchanger fixing | Screw |
heat exchage fixing holder to separate the | ||
heat exchage from the back body. | holder |
|
5)Remove one screw at below right side of heat exchanger that used for fixing between
heat exchanger and back body by Fix | Screw | |
Evaporator (DN) | ||
| ||
The Fix Evaporator (DN) is used for |
| |
transportation only and can be removed |
| |
without any concern to unit operation. |
| |
Follow to 7) for removing. |
|
Fix Evaporator (DN)
6)Remove right side of the end plate from two fixing rib while sliding slightly the heat exchanger rightward.
Rib on the right side of the end plate
– 96 –