Toshiba S20LP instruction manual LS overview, Menu

6 F 3 B 0 3 5 6

1.3 S-LS overview

The S-LS (TOSLINE-S20 Loader System) on a personal computer (PC) monitors station conditions, reads/writes control data, and sets up parameters. The transmission parameters set by S-LS is stored in the S20LP-station's built-in EEPROM.

Connection between S-LS and S20LP-station is made by an loader cable, that is the same cable as for T-PDS.

The following are the details of the menu. Select an intended station in the Station Connection Diagram window for display and specify the window in the menu or the toolbar.

[File]

[Display Scan Address List] [Display Station Down Information] [Save Files All Station’s Information] [Exit]

Displays the Scan Address List window.

Displays Down Information when the local station is downed. Saves the setup information of all stations in the file. Terminates the application.

[Menu]

[Setting Information]	Displays the Setting Information window.
[Data Access]	Displays the Data Access window.
[RAS Information]
[Online Map]	Displays the Online Map window.
[Scan Healthy Map]	Displays the Scan Healthy Map window.
[Loop Map]	Displays the Loop Map window.
[Station Status]	Displays the Station Status window.
[Station Down Information]	Displays the Station Down Information.
[RAS Counter Information]	Displays the RAS Counter Information
[Online/Standby Request]	Displays the Online/Standby Request window.
[Test Request]	Displays the Test Request window.

[Option]

[Station Display Position]
[Registration]	Registers the display positions of the stations rearranged.
[Display]	Reflects the display positions of the registered stations in the window.
[Normal]	Displays the stations rearranged in the ascending order of smaller display
	position numbers.
[Communication Environment Setting] Displays the Communication Environment Setting window.

[Window]

[Display Small Size]Displays the Station Connection Diagram in small size.

[Help]

[Contents]	Displays the Help window.
[Key Word Search]	Displays the Retrieve window in Help.
[Version Information]	Displays the information of the application version.

⎯ 9 ⎯