Toshiba instruction manual ∙ Status LEDs, S20LP port for T2N PU245N, For SN325

6 F 3 B 0 3 5 6

∙Status LEDs:

Indicate the status of the S20LP-station.(see Section 5.3)

S20LP port for T2N (PU245N)

SRUN	Lit	Station is normal
	Not lit	Down mode
SONL	Lit	Online mode (Scan transmission is executing)
	Blink	Standby mode (Scan transmission is not executing)
	Not lit	Offline mode (Scan transmission is not executing)
SACC	Lit	T2N is accessing the port
	Not lit	T2N is not accessing the port

For SN325

STN	Lit	Station is normal
	Not lit	Down mode
ONL	Lit	Online mode (Scan transmission is executing)
	Blink	Standby mode (Scan transmission is not executing)
	Not lit	Offline mode (Scan transmission is not executing)
SCAN	Lit	Scan transmission is executing
	Not lit	Scan transmission is not executing
ACC	Lit	T3H is accessing the station
	Not lit	T3H is not accessing the station
LOOP	Lit	LOOP is normal (Cut off mode for main terminal station)
	Not lit	LOOP is abnormal
TX1	Lit	TRM1/RCV2 is normal
	Not lit	TRM1/RCV2 is abnormal
TX2	Lit	TRM2/RCV1 is normal (Note 1)
	Not lit	TRM2/RCV1 is abnormal (Note 1)

(Note 1) When the SN325 operates a terminal station, this LED is normally not lit.

⎯ 7 ⎯