Toshiba Satellite user manual Sleep/Hibernation, Carrier

Troubleshooting

ProblemProcedure

After making a call you can’t hear a ring

Make sure the tone or pulse selection in your communications application is set correctly.

You can also use the ATD command. Refer to the chapter on AT commands in online help files for Appendix C, AT Command.

Communication is cut off unexpectedly

The computer will automatically cut off communication when connection with the carrier is not successful for a set time interval. Try lengthening this time interval.

	A CONNECT display is	Check the error control setting in your
	quickly replaced by NO	communications application.
	CARRIER
		You can also use the AT\N command.
	Character display	In data transmission, make sure the parity bit and
	becomes garbled during	stop bit settings correspond with those of the
	a communication	remote computer.
		Check the flow control and communication
		protocol.
	You cannot receive an	Check the rings before auto answer setting in an
	incoming call	incoming call your communications application.
		You can also use the ATS0 command.
		If problems persist, contact your dealer.
Sleep/Hibernation
	Problem	Procedure
	The system will not	Is Windows Media Player open? The system
	enter sleep/hibernation	might not enter sleep/hibernation, if Windows
		Media Player is either playing a selection or
		finished playing a selection. Close Windows
		Media Player before you select sleep/hibernation.
		If problems persist, contact your dealer.

User’s Manual 9-13