Toshiba Satellite user manual Lan, Recovery discs

Troubleshooting

LAN

Problem	Procedure
Cannot access LAN	Check for a firm cable connection between the
	LAN jack and the LAN HUB.
Wake-up on LAN	Make sure the AC adaptor is connected. The
	does not work Wake-up on LAN function
	consumes power even when the system is off.
	If problems persist, consult your LAN
	administrator.

Wireless LAN

If the following procedures do not restore LAN access, consult your LAN administrator. For more information on wireless communication, refer to

Chapter 4, Operating Basics.

ProblemProcedure

Cannot access Wireless Make sure the computer’s wireless

LAN	communication switch is set to on.
	If problems persist, consult your LAN
	administrator.

Recovery discs

ProblemProcedure

The following message appears when executing Recovery Disc Creator.

“The Recovery Disc Creator can not be launched because there is no recovery partition.”

You will see this message if you have previously chosen to remove the partition and are trying to create “Recovery Media”. When there is no recovery partition, the Recovery Disc Creator cannot make Recovery Media.

However, if you have already created a “Recovery Media”, you can use it to restore the recovery partition.

Simply follow the instructions in “Restoring the preinstall software from your creating Recovery Media” section in this manual. You will be directed to select “Restore Original Factory Image” from the drop-down menu. If you have not created “Recovery Media”, please contact TOSHIBA support for assistance.

User’s Manual 9-14