Operating Basics
■You can use
■Other
■Data written to a
■Data deleted (erased) from a
■In writing to a
■Since the disc is based on the DVD standard, it will be filled with dummy data if the written data is less than about 1 GB. Even if you write only a small amount of data, it might take time to fill in the dummy data.
■
■When multiple drives that can write data to discs are connected, be careful not to write to the wrong drive.
■Be sure to connect the universal AC adaptor before you write or rewrite.
■Before you enter sleep/hibernation mode, be sure to finish
■Be sure to close all other software programs except the writing software.
■Do not run software such as a screen saver, which can put a heavy load on the CPU.
■Operate the computer in the
■Do not write while virus check software is running. Wait for it to finish, and then disable virus detection programs including any software that checks files automatically in the background.
■Do not use hard disk utilities, including those intended to enhance HDD access speed. They may cause unstable operation and data damage.
■Write from the computer’s HDD to the CD/DVD. Do not try to write from shared devices such as a LAN server or any other network device.
■Writing with software other than TOSHIBA Disc Creator is not recommended.
User’s Manual |