Operating Basics
■Do not operate DVD MovieFactory immediately after turning on the computer. Please wait until all Disc Drive activity has stopped.
■When recording to a
■CD recorder, JPEG functions,
■While recording video to DVD, please close all other programs.
■Do not run software like a screen saver because it can put a heavy load on the CPU.
■Do not support mp3 decode and encode.
2.Before recording the video to DVD
■When you record DVD disc, please use only discs recommended by the Drive manufacturer.
■Do not set the working drive to a slow device like a USB1.1 hard disk drive or it will fail to write DVD.
■Do not perform any of the following actions:
■Operate the computer for any other function, including using a mouse or touchpad, or closing/opening the display panel.
■Bump or cause vibration to the computer.
■Use the Mode control button and Audio/Video control button to reproduce music or voice.
■Open the DVD drive.
■Install, remove or connect external devices, including such items as a SD/SDHC memory card, PC Card/ExpressCard, Memory Stick/Memory Stick Pro, MultiMediaCard, USB device, external monitor, or an optical digital device.
■Please verify your disc after recording important data.
■
■Not support to output VCD and SVCD format.
3.About Straight to Disc
■Not support to record on
■Not support to record DVD+VR format by HDV
■HDV support to burn
■
4.About recorded DVDs
■Some
■When playing your recorded disc on your computer, please use InterVideo WinDVD software application.
■If you use an
User’s Manual |