Toshiba Satellite user manual Display

HW Setup and Passwords

3.Click the OK button. If the character string you enter matches the reg- istered password, the password option is reset and the display changes to:

Not registered

If they do not match, the following message appears. You must repeat step 1.

Incorrect Password!!!

If you enter the password incorrectly three times in a row, the computer need to shut off.

You will not be able to access the password option in the HW Setup. In this case you must turn the power off and back on to retry the procedure.

4.Follow the same procedures described in the earlier section, How to set the password, to set a new user password.

Display

This tab lets you customize your computer’s display settings for either the internal LCD screen or for an external monitor.

Power On Display

Lets you set the display to be used when the computer is booted.

Auto-Selected	Selects an external monitor if one is connected,
	otherwise, it selects the internal LCD display
	(Default).
LCD + Analog RGB	Selects both the internal LCD and an external
	monitor for simultaneous display.

CPU

Dynamic CPU Frequency Mode

This option lets you choose from the following settings:

Dynamically	CPU power consumption and clock speed
Switchable	automatic switching function is enabled. When
	the computer is in use, CPU operation is
	automatically switched when necessary.
	(Default)
Always Low	CPU power consumption and clock speed
	automatic switching function is disabled. The
	CPU always runs at low power consumption and
	low speed.

User’s Manual 7-3