Toshiba SD-37VBSB manual Playback connection, Component video outputs/inputs, Dvd/Vcr

Playback connection

Component video outputs/inputs

PROGRESSIVE outputs/inputs

Some TVs or monitors are equipped with component video inputs that are capable of reproducing a progressively scanned video signal. Connecting to these inputs allows you to view the highest quality pictures with less flicker.

INTERLACED outputs/inputs

Some TVs or monitors are equipped with component video inputs. Connecting to these inputs allows you to enjoy the highest quality DVD picture playback.

Connecting to an audio system and TV equipped with component video inputs

Component video cable (not supplied)

	Component (Y) Output
	Component (PB) Output
DVD/VCR	Component (PR) Output
	Stereo Amplifier
Audio (L) Output		To Audio (L) Input
Audio (R) Output	AUDIO Cord (not supplied)

￿￿￿￿￿￿￿￿￿!￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿	To Audio (R) Input
•￿￿￿￿￿￿￿￿￿￿￿Make the￿￿￿following setting

Component video input

TV

Notes:

• Actual labels for component video inputs may vary depending on the TV manufacturer. (ex. Y, R-Y, B-Y or Y, CB, CR)

•In some TVs or monitors, the colour levels of the playback picture may be reduced slightly or the tint may change. In such a case, adjust the TV or monitor for optimum performance.

Note:

In connecting to a TV that are not capable of reproducing a progressively scanned video signal using the component sockets, do not select “Progressive” in “Output” menu. If you do it, the component video outputs does not feed the correct signals and you can not see any picture (see page 53).

Connect to an AV Amplifier with built-in digital surround

If you are using an Amplifier with a built-in digital surround as follows, you can enjoy the various audio systems such as Dolby Digital and DTS by using the Coaxial Digital Output.

Use this connection to connect an:

•AV amplifier with built-in Dolby Digital decoder

•AV amplifier with built-in DTS decoder

	Coaxial digital cable (not supplied) AV Amplifier with
DVD/VCR		built-in various
		decoder as above

SCART-Socket Coaxial digital Audio Output

(for RGB OUT,	SCART-cable (not supplied)
Composite IN/OUT)

TV

To SCART input

Notes:

•The COAXIAL jack is useful only for DVD section.

•DTS audio will be output only from the COAXIAL output. To hear DTS audio, DTS-Decoder is necessary. When playing DTS-encoded CDs, only noise will be heard from the speakers or analogue stereo outputs.

•Some DTS decoders which do not support DVD-DTS interface may not work properly with the unit.

14

2J50101A [EN] P14-17 14 27/2/06, 5:39 PM