Toshiba SD-37VBSB manual Duplicating a video tape, Duplicating a disc material onto a video tape

Models: SD-37VBSB

1 60
Download 60 pages 52.67 Kb
Page 32
Image 32
Duplicating a video tape

Duplicating a video tape

When you try to connect with a cable, make sure the power of both units have been turned off.

Connect the recording unit with the TV. Therefore you can just watch what the recording unit is recording.

1 Load a blank cassette tape with the erase prevention tab intact into the recording DVD/VCR. Load the previously recorded cassette tape into the playback VCR or a video camera.

VCR

2 Use AUX or CH +/– of the recording DVD/VCR to select the “L1”, “L2” or “L3” instead of the preset channel.

L1 = TV-RGB/Composite Scart Socket

L2 = VCR/DECODER Scart Socket

L3 = Front AV jacks

3 Press REC/OTR and then PAUSE/STEP of Recording unit.

4 Press PLAY-button and then PAUSE/STEP-button of Play- back unit. Now you can see the still picture of the scene that you wish to duplicate.

5 Press PAUSE/STEP of both units simultaneously to start the duplicating.

Note:

Before starting the duplicating process, select the proper tape speed using SP/LP. For a pre-recorded tape the correct tape speed will be set automatically during playback.

Connection with second Video recorder or Video camera

 

OR

Playback unit

Playback on

 

camera

 

Recording unit

 

(not

 

supplied)

 

(not supplied)

Press AUX on the recording unit repeatedly until L3 appears.

Duplicating a disc material onto a video tape

You can record disc material in DVD, Video CD, Audio CD, etc. onto a video tape with this DVD/VCR only.

If the DVD disc has a Copy-guard feature, the duplicating is not possible. A symbol mark “Connection with second Video recorder or Video cameraDuplicating a disc material onto a video tape” will appear on the screen for approx. 4 seconds. See page 33 for more information about the DVD playback.

Preparation:

Load a cassette tape with the erase prevention tab intact.

Select the tape speed in the VCR mode. (see P.25)

Load a disc you wish to duplicate.

1 Press DVD to select the DVD mode. (The DVD indi- cator will light)

2 Press PLAY to start the disc playback.

3 During disc playback, press REC/OTR.

Notes:

You can set the duplicating time using the OTR- function. At step 3 above press REC/OTR repeatedly until the desired duplicating time appears on the screen. (P.27)

Only non-protected PAL discs can be dubbed to video tape.

*Unauthorized recording of copyrighted television programs, films, video cassettes and other materials may infringe the rights of copyright owners and be contrary to copyright laws.

32

2J50101A [EN] P25-32

32

27/2/06, 5:40 PM

Page 32
Image 32
Toshiba SD-37VBSB manual Duplicating a video tape, Duplicating a disc material onto a video tape, Preparation