Toshiba SD-37VBSB Setting the time and date manually, Preparation, to select CLOCK

Setting the time and date manually

You must set the date and time manually for timer recordings if Auto setup process did not set them correctly.

Preparation:

•Turn ON the TV and set to the AV input mode.

•Press VCR to select the VCR mode. (The VCR indicator will light.)

Example: Setting the clock to "11:30" October, 28 (SAT), 2006.
				￿￿￿			￿
TER.			￿￿￿￿				￿￿￿￿￿￿		￿￿￿￿￿￿
				￿￿		￿
1 Press VCR MENU. The VCR menu screen will appear.
2 Press	or	to select SYS-			￿			￿
TEM SETUP, then press EN-
SET, then press ENTER.			￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿
3 Press	or	to select CLOCK

Notes:

•In case of a power failure, the clock will continue to operate for another 30 min- utes with quartz-controlled precision. To indicate that the power failure has lasted for an excessive period of time "- -:--" will appear on the display. In this case readjust time and date.

•The AUTO TIME function adjusts the clock only if the error is within 5 minutes.

•The VCR automatically adjusts the clock setting for Daylight Saving Time once you set AUTO TIME to ON.

				￿￿￿￿￿￿￿			￿
	Press	or	repeatedly until	￿￿		￿￿￿￿￿￿	￿￿￿￿￿￿￿￿￿
4	“28” appears. Then press .			￿￿	￿￿￿		￿￿￿￿
5 Set the month, year, hour and						￿￿￿￿￿￿	￿￿￿￿￿￿￿￿￿
	minute as in step 4.				￿￿￿￿		￿￿￿￿
	Then press ENTER.
	• In case of an erroneous input,
	press	to go back to previ-
	ous step and enter again.			￿￿￿￿
6 Press		or	to select AUTO TIME ON or OFF.
	The VCR automatically corrects the clock setting every hour

once you set AUTO TIME to ON.

7 Press VCR MENU repeatedly until the TV picture appears on
	the screen.
8	The clock will begin operation.
		VCR

17

2J50101A [EN] P14-17 17 27/2/06, 5:39 PM