Toshiba SD-37VBSB manual Marking desired scenes, Marking the scenes Returning to the scenes

Marking desired scenes

The unit stores the points that you want to watch again up to 3 points.

You can resume playback from each scene.

Marking the scenes		Returning to the scenes
1 Press MARKER during￿￿￿￿￿￿￿playback.		1 Press MARKER during￿￿￿￿￿￿￿playback￿￿or stop￿￿￿￿mode.
Select the blank Marker using C or D.		2	￿￿￿￿￿￿￿	￿￿￿￿￿￿
			Press C or D to select the Marker 1-3.
2 Then press ENTER at the desired scene.
• Repeat this procedure to set the
other 2 scenes.	￿￿￿￿￿￿
￿￿￿￿￿￿￿		3 Press ENTER.

Playback starts from the marked scene.

3 Press MARKER to clear this display.

To cancel the Marker

Follow the above steps 1~2, then press CLEAR.

Notes:

•Some discs may not work with the marking operation.

•The marking is canceled when you open the disc tray or turn the power off.

•Some subtitles recorded around the marker may fail to appear.

•In case of Video CD with PBC, Marker function is prohibited.

37

2J50101A [EN] P37-40 37 27/2/06, 5:40 PM