Toshiba SD-37VBSB manual Zooming/Locating desired scene, Press ZOOM during playback

Zooming/Locating desired scene

Zooming Locating desired scene

This unit will allow you to zoom in on the frame image. You can then make selections by switching the position of the frame.

1 Press ZOOM during playback.

The center part of the image will be zoomed in.

Each press of ZOOM will change the ZOOM 1 (x 1.3), 2 (x 1.5) and 3 (x 2.0).

1

Use the title, chapter and time recorded on the DVD disc to locate the desired point to playback. In the case of VCD/CD discs, time and track are used to locate the desired point to playback. To check the title, chapter and time, press DISPLAY.

1 Press JUMP during playback or resume stop mode.

Jump

Title

Chapter

Time

2 Press C/D/B/A to view a different part of the frame.

You may move the frame from the center position to UP, DOWN, LEFT or RIGHT direction.

In the zoom mode, press ZOOM repeatedly to

3 return to a 1:1 view ( Off).

Notes:

•You can select the Pause, Slow or Search playback in the zoom mode.

•Some discs may not respond to zoom feature.

2 Press C or D to select the “Title/Track”, “Chapter” or “Time”.

Jump

Title

Chapter

Time

Press Number buttons (0–9) to input the

3 number.

Jump

Title

Chapter12

Time

•If you input a wrong number, press CLEAR.

•Refer to the package supplied with the disc to check the numbers.

4 Press ENTER. Playback starts.

• When you change the title, playback starts from Chapter 1 of the selected title.

• Some discs may not work in the above operation.

Notes:

•In case of the Audio CD and Video-CD, only Track and Time can be selected.

•In case of the Video-CD playback with PBC, the JUMP does not work. Turn off the PBC (see page 42).

36

2J50101A [EN] P33-36 36 27/2/06, 5:40 PM