Toshiba SD-37VBSB Timer recording, To record with the PDC Programme Delivery, Control system

Timer recording

Timer recording can be programmed on the TV-screen with the remote con- trol. The built-in timer allows automatic unattended recording of up to 8 pro- grams within 1 month.

Preparation

• Turn ON the TV and set to the AV input mode.

• Press VCR to select the VCR mode. (The VCR indicator will light.)

• Load a video cassette with the erase prevention tab intact. Make sure with CALL that the time and date are correct.(see page 29).

Example: Timer recording for channel 1, 13:00 to 14:30 with Tape speed LP on timer program number 1.

1	Press VCR MENU. Press	or		￿￿	￿	￿￿￿	￿￿￿￿￿￿
	to select TIMER REC SET.
	Then press ENTER.
				￿￿￿￿￿￿￿￿￿￿
			￿	￿￿￿	￿￿￿￿￿

2 Each line stands for one pro- gram of the 8 memories. Select

one line with or . Then press ENTER.

------ --:--	--:--	--	-
------ --:--	--:--	--	-
------ --:--	--:--	--	-
------ --:--	--:--	--	-
------ --:--	--:--	--	-
------ --:--	--:--	--	-
------ --:--	--:--	--	-
------ --:--	--:--	--	-
SELECT :	/ ENTER
EXIT : MENU

Notes:

•In the event of a power failure the data of the automatic recording will be main- tained in the built-in memory for about 30 minutes. Also, the clock will continue to run for this period of time. Thereafter the data will be deleted. When the power resumes, the time display will change to “--:--” that the timer setting will have to be set.

•Not all TV Stations transmit PDC signal all of the time, therefore it is advisable to check before setting PDC to ON, if you do set PDC to ON and no signal is received your recording might not take place at all. To check PDC status, change to the channel on your DVD/ VCR you wish to record from, if the word "PDC" appears on the screen for a few seconds then that channel is broadcasting PDC and you can set the feature to ON.

28

3 Set the desired date with or				￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿
or Number buttons (0-9).
Then press		to accept it.
Set the Starting time (13:00),				￿￿￿￿￿￿￿￿￿			￿￿￿￿￿￿￿￿
press	to go back to before
4 ending time (14:30), channel				￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿
(1) and Tape speed (LP) in the
same way as the step 3.
• In case of an erroneous input
step and enter again.
To record with the PDC (Programme Delivery
Control) system				￿￿￿￿￿￿￿		￿￿￿
The PDC system starts recording
when it picks up a special signal
transmitted by the broadcaster
with the TV programme – even if
the TV programme starts early,					￿￿￿
late or runs on longer than				￿￿￿￿￿￿￿￿￿￿￿			￿￿￿￿￿￿￿￿
scheduled. In step 4, press ▼
repeatedly until PDC OFF flashes,
then press		or	to display "ON" for recording with PDC.

....to be continued to next page

2J50101A [EN] P25-32 28 27/2/06, 5:39 PM