Toshiba SD-37VBSB manual Stereo recording and playback, NICAM stereo sound reception, Preparation

Stereo recording and playback

This DVD/VCR is capable of recording sound in Hi-Fi system. The recording will be performed automatically. NICAM STEREO broadcasts are recorded in its original sound system regardless of the setting. If you wish to record NICAM programmes, select NICAM “AUTO” as follows.

Preparation:

• Turn ON the TV and set to the video input mode.

• Press VCR to select the VCR mode. (The VCR indicator will light.)
NICAM stereo sound reception:			￿￿￿￿￿			￿￿￿￿￿￿
		￿￿￿￿		￿￿￿￿￿￿
Press VCR MENU. Press	or		￿￿	￿	￿￿￿	￿
1 to select NICAM. Then press	/
or ENTER to select [AUTO].

2 Press VCR MENU repeatedly until the TV picture appears.

NICAM programmes are divided into 4 types as shown below.

NICAM STEREO broadcast
“NICAM ST” illuminates when a NICAM
STEREO broadcast signal is received.	NICAM ST

NICAM MONO A broadcast

“NICAM M1” illuminates when a NICAM MONO A broadcast signal is received.

NICAM MONO A B broadcast

“NICAM M1/2” illuminates when a NICAM MONO A and MONO B broadcast signal is received.

NICAM OFF

It will be displayed for the NICAM signal when the “NICAM [OFF]” is selected in menu screen.

NICAM M1

NICAM M1/2

NICAM OFF

Note:

When listening to a stereo broadcast or playing back a Hi-Fi tape recorded in stereo, you have to connect the DVD/ VCR with the stereo audio system or the stereo TV. The sound which is output from the RF OUT jack is monaural.

30

2J50101A [EN] P25-32 30 27/2/06, 5:40 PM