11. PROGRAMMING PROCEDURES
11.5 PLU VERIFYING LABEL
11.5PLU VERIFYING LABEL
Menu Group: | 1 |
Item No.: | 4 |
PLU data stored in the scale are verified in the following procedure.
g
<MENU>
Group 1
4 |
|
|
|
| Set the entire PLU#. |
| 1 | 0 | 0 |
|
|
| |||
|
|
|
|
|
Set the individual PLU#. (Ex. PLU #100)
1
Set the block PLU#. (Ex. PLU #100~199)
1 | 0 | 0 | NEXT | 1 | 0 | 8 | |
PLU | |||||||
|
|
|
|
|
|
Set the zone PLU#. (Ex. PLU #100~108)
ENTER |
The confirmation label is issued.
CLEAR |
To interrupt label issue.
ENTER |
To resume label issue which has been interrupted.
PROG. |
ESC. |
g
<MENU>
Group 1
Main
<MENU>
NOTES:
1.Labels are printed in both batch mode and
2.When no PLU is stored in the selected range, an error occurs when the ENTER key is pressed.
3.Pressing the CLEAR key releases the scale from the error mode and returns to the initial status of this menu.
4.After clearing a paper jam error, the scale will wait for an entry of PLU# again.
