Toshiba SL-9000-LSB owner manual Print Format, By pressing Key

11. PROGRAMMING PROCEDURES

11.10 PRINT FORMAT

11.10 PRINT FORMAT

Menu Group:	2
Item No.:	0

The SL-9000 can memorize 5 different print formats. After print formats are set, you can call them by entering the print format number.

<MENU>

Group 2

0

Select the print format # which allocates the label format #

by the NEXT PLU key or – key.

Enter the label format #.

(Refer to Table 2)

CHANGE

PLU

Issue method	On-demand
Batch	Select "SENSIBILITY ADJUST"		SET
	by pressing the	key.	NEXT

When Batch Printing with backing paper is selected, the sensitivity of the label sensor will be set by pressing the SET NEXT key before issuing label.

		j
FEED	TEST	Is print	Correct
		position
		correct?

Incorrect

Select the Item for adjustment.

1 gradation

= 0.154mm (1 dot)

1 gradation

= 0.462mm (3 dots)

1 gradation

= 0.462mm (3 dots)

Only when using the bar code change label with pre-feed area. (This adjustment cannot be made for the Variable Length Label.)

Enter the correct label feed value.

(Range: 0~199)

Enter the correct value for commodity name position. (Range: 0~9)

Enter the correct value for address position. (Range: 0~15)

Enter the correct value for pre-feed area.

(Range: 0~65)

ENTER

ENTER

ENTER

ENTER

j

j

j

j

CHANGE

PLU

<MENU>	PROG.
Group 2
Main	ESC.
<MENU>

NOTES:

1.When a commodity name position is adjusted, an address position will move automatically.

2.When entering the other label format #, fine adjust values are initialized.

3.Selecting label format numbers other than those provided in Table 2 results in an error.

4.When selecting a variable length label format, rectangles are printed instead of print items when test printing.

5.Pressing the key allows you to select a print format number from 1 to 5.

6.Be sure to press the SET NEXT key when a label format for batch printing with backing paper is selected.

11-16