Toshiba SL-9000-LSB owner manual LON System, Id #

11. PROGRAMMING PROCEDURES

11.14 LON SYSTEM

11.14 LON SYSTEM

Menu Group:	2
Item No.:	4

The SL-9000 scales which consist of a master, satellites, and a backup master are connected each other by the LON cable to transmit data such as PLU, ING., NUTRI, etc.

ID# 1 is reserved for the master terminal.

ID# 2 is reserved for the backup master terminal or satellite terminal. ID# 3 to 32 are for satellite terminals.

Setting numbers other than the above results in an error.

		m
<MENU>	4	CHANGE
Group 2		PLU

ID #

ENTER

		IN-LINE OFF-LINE
ID#: 1	Set the number of		ENTER	DLL?	Yes	n
	scales in the system.
				No		p
	PROG.	<MENU>
		Group 2
	ESC.	Main
		<MENU>

m

NOTES: 1. Before starting the above procedure, press the key and enter IN-LINE mode.

2.When installing the backup master terminal, set the master scale’s initial status of #9-1 to 1.

3.Set ID # to all scales connected by LON cable.

4.When the display power is turned on, a satellite terminal is ready to receive data from the master terminal.

5.After setting the ID #, turn the power switch OFF and ON again.

11-22