59
Operations
58
Setting up the projector using a Web browser

■How to use the “Projector Configuration Tool”

The “Projector Configuration Tool” uses the Web server features of the projector to
set up the projector using a wireless LAN PC card.
When using the “Projector Configuration Tool”, set up the wireless LAN connecting
the projector and the computer.
1

See “Checking the projector status”

p.48

to display

information on the screen and write down the IP address.

2

Invoke Internet Explorer.

Internet Explorer Ver. 5.0 or later is recommended. Enable the Javascript functions.
3

In the address bar, enter the IP address

“http://xxx.xxx.xxx.xxx/” recorded in step

1

above.

The Web browser will then display the following page.
Projector name
Projector ID
Menu
Enter the projector
name to be registered.
Note 1: To prevent access from third parties, the projector is restricted to permit access
only from the computer that has been set up for the TCP/IP to have the same
network address as the projector.
Note 2: If you use a proxy server, do not enable the proxy when accessing the above IP
address.
The TCP/IP settings for the projector and computer are required even in the
wireless LAN Ad hoc mode.
4

Select items from the menu on the left.

Setting: Allows you to make various settings on the wireless/card
menu. When Browser authentication has been set to On,
access to the setup page requires the input of the password.
Status Display: Displays some states of the projector.
Features: Introduces the functions available in wireless/card input
mode.
Projector name: Enter a character string and press the Set button, and it will
be set as the projector name.
Top: Returns you to the top page.
TOSHIBA Projector Site
:The browser will display the home page at http://
multimedia.projector-toshiba.com/map.html, providing
projector information. The home page address is subject to
change without notice.
(The Toshiba’s web site can be browsed only when your
computer can access the Internet.)

●Details on major items

•Setting
Allows you to make various settings on the wireless/card menu. When Browser authentication
has been set to On, access to the setup page requires the input of the password.
Network: The items available here are equivalent to those in the wireless/card
menu. Note, however, that security items such as “Remote control” and
“Browser authentication” cannot be set. Entering individual items and
press the Execute button to update their setting.
Slide Show: The items available here are equivalent to those in the wireless/card
menu. Entering individual items and press the Execute button to update
their setting.
Projector name
Discards what you have entered.
Press this button after entering
the password.
Projector ID