1716
Preparations
(18) (16)
(12)(11)
(9)
(10)
(13)(20)
(2)
(19) (17) (15) (14)
(8)
(1) (3)
(4)
(5)
(6) (7)
Name :Main Function
(1) Infrared remote sensor : Senses commands from the remote control.
p.18
(2) CONTROL terminal : When operating the projector via a computer, connect
this to the controlling computer’s RS-232C port.
p.71
(3) CARD indicator : Displays PC card’s status.
p.21
(4) UNMOUNT button : Press before removing PC card.
p.21
(5)
RESET switch (inside depression)
:Press if CARD indicator turns red.
p.21
(6) Eject button : Press to remove PC card.
p.21
(7) PC card slot :Insert PC cards here.
p.21
(8) AUDIO OUT terminal : Outputs audio signals.
(9) MONITOR terminal : Connect to a computer display, etc.
(
10
)COMPUTER 2 terminal :
Input RGB signal from a computer or other source, or a
component video signal (Y/PB/PR) from video equipment.
(
11
)Main power switch :AC power line ON (standby)/OFF.
(
12
)AC IN socket : Connect the supplied power cord here.
(
13
)AUDIO IN terminal :
Input audio signals from a computer or video equipment
with a component video signal output terminal.
(
14
)COMPUTER 1 terminal :
Input RGB signal from a computer or other source, or a
component video signal (Y/PB/PR) from video equipment.
(
15
)S-VIDEO terminal : Input S video signals from video equipment.
(
16
)AUDIO (L/R) terminal : Input audio signals from video equipment.
(
17
)VIDEO terminal :Input video signals from video equipment.
(
18
)AUDIO (L/R) terminal : Input audio signals from video equipment.
(
19
)USB terminal : Provided for servicing purposes only. Do not use for
any connection.
(
20
)Antitheft lock hole : Attach a safety cable or any other antitheft device.
Note
•Although this owner’s manual abbreviates component video signals as Y/PB/PR, the
product also supports signals from video equipment marked “Y/CB/CR.”
Parts on the rear panelNames of each part on the control panel and remote controlControl panel Remote Control
(2)
(3)
(4)
(9) (10) (11)
(1)
(5)
(8)
(7)
(6)
Name :Main Function
(1) ENTER button :Accepts the selected mode.
(2) MENU button : Displays menus.
p.29
(3) SET UP button : Sets up image and mode.
p.26
(4) ON/STANDBY button :Turns the power on/off (standby).
p.22
(5) ON indicator :Displays whether power is on or off.
p.22
(6) INPUT button : Selects input.
p.24
(7) RETURN button : Goes back one screen.
(8) Selection button : Menu selections and adjustments,etc.
p.30
(9) LAMP indicator : Displays lamp mode.
p.23
(
10
)TEMP indicator : Lights when internal temperature too high.
p.65
(
11
)FAN indicator : Displays cooling fan mode.
p.65
(
12
)FREEZE button : Pauses image.
p.28
(
13
)MUTE button : Cuts off the picture and sound temporarily.
p.28
(
14
)Numeric keypad :Use to set up the wireless LAN. Numbers and charac-
ters can be entered.
p.37
Note
•For the remainder of this manual, buttons are referred to as follows:
Selection buttons ⇒ ; ENTER button ⇒
Remote control
transmitter
(4)
(3)
(8)
(6)
(1)
(2)
(12)
(14)
(13)
(7)