45
Operations
44
Projecting images stored in a memory PC card (Continued)
•[Interval]
You can set the display interval of time (in seconds or minutes) for slide shows to be
played automatically.
•[Display effect]
When playing a slide show, the projector can give various display effects or transitions
to each slide being displayed.
The transitions available are listed below:
•None
Display each slide normally.
•Wipe
Display the next slide gradually upward (Wipe ↑), downward (Wipe ↓), to the left
(Wipe ←), or to the right (Wipe →), over the current slide.
•Dissolve
Display the next slide gradually in a certain fixed block pattern over the current slide.
•Cover
Display the next slide as sliding upward (Cover ↑), downward (Cover ↓), to the left
(Cover ←), or to the right (Cover →), over the current slide.
•Checker
Display the next slide gradually from the left using checkered blocks over the current
slide.
•Zoom/Rotate zoom
Display the next slide by enlarging it gradually, either straight from the center (Zoom)
or while turning it starting from the center (Spin zoom), over the current slide.
•Belt wipe
Display the next slide gradually in stripes from both sides, over the current slide.
•Blind
Display the next slide, as if it opened like a window blind, over the current slide.
•[Play icon]
The slideshow icon can be displayed.
•Standard
The projector handles the slideshow icon as follows depending on the “On/Off”
setting of Icon on the projector’s menu.
Icon On:The projector displays the icon upon the start of playing a slide show and
turns it off after a few seconds.
Icon Off:The projector does not display the icon.
•Continuous
The projector keeps the icon displayed during the slide show.

■Automatic demonstration

If you set Auto. demo to On in “Setting slideshow options”
p.43
, the projector starts
a slide show automatically when it switches to the wireless/card input mode with a
memory PC card plugged into the PC card slot according to the procedure in
“Mounting a PC card”
p.21
.
•The slide show is played as set in “Setting slideshow options”.
•The slide show displays the JPEG files stored in the root directory of the memory PC
card.
•If you set PC card display to Auto, the projector starts a slide show automatically when
the power is turned on with a memory PC card plugged.
•To suspend the slide show, press the button. Pressing it again resumes the slide show.
•To end the slide show, press the RETURN button. A thumbnail list will then be displayed.