TP-Link TL-SL5428E manual MIB View, ¾ Community Table, Community Name

	• read-only:Management right of the Community is
	restricted to read-only, and changes cannot be made to
	the corresponding View.
	• read-write:Management right of the Community is
	read-write and changes can be made to the corresponding
	View.
MIB View:	Select the MIB View for the community to access.
¾ Community Table
Select:	Select the desired entry to delete the corresponding Community.
	It is multi-optional.
Community Name:	Displays the Community Name here.
Access:	Displays the right of the Community to access the View.
MIB View:	Displays the Views which the Community can access.
Operation:	Click the Edit button to modify the MIB View and the Access
	right of the Community, and then click the Modify button to
	apply.

Note:

The default MIB View of SNMP Community is viewDefault.

Configuration Procedure:

zIf SNMPv3 is employed, please take the following steps:

Step	Operation	Description
1	Enable SNMP function globally.	Required. On the SNMP→SNMP Config→Global
		Config page, enable SNMP function globally.
2	Create SNMP View.	Required. On the SNMP→SNMP Config→SNMP
		View page, create SNMP View of the management
		agent. The default View Name is viewDefault and the
		default OID is 1.
3	Create SNMP Group.	Required. On the SNMP→SNMP Config→SNMP
		Group page, create SNMP Group for SNMPv3 and
		specify SNMP Views with various access levels for
		SNMP Group.
4	Create SNMP User.	Required. On the SNMP→SNMP Config→SNMP
		User page, create SNMP User in the Group and
		configure the auth/privacy mode and auth/privacy
		password for the User.
z If SNMPv1 or SNMPv2c is employed, please take the following steps:
Step	Operation	Description
1	Enable SNMP function globally.	Required. On the SNMP→SNMP Config→Global
		Config page, enable SNMP function globally.
		193