Manuals / TP-Link / Computer Equipment / Switch

TP-Link TL-SL5428E manual Dhcp Snooping, Start IP Address, End IP Address, Scan

Models: TL-SL5428E

1 259

Download 259 pages 46.72 Kb

Page 167

Figure 11-4 ARP Scanning

The following entries are displayed on this screen:

¾Scanning Option

Start IP Address:	Specify the Start IP Address.
End IP Address:	Specify the End IP Address.
VLAN ID:	Enter the VLAN ID. If blank, the switch will send the untagged
	packets for scanning.
Scan:	Click the Scan button to scan the Hosts in the LAN.
¾ Scanning Result
Select:	Select the desired entry to be bound or deleted.
Host Name:	Displays the Host Name here.
IP Address:	Displays the IP Address of the Host.
MAC Address:	Displays the MAC Address of the Host.
VLAN ID:	Displays the VLAN ID here.
Port:	Displays the number of port connected to the Host.
Protect Type:	Displays the Protect Type of the entry.
Collision:	Displays the Collision status of the entry.

• Warning: Indicates that the collision may be caused by the MSTP function.

• Critical: Indicates that the entry has a collision with the other entries.

11.1.4 DHCP Snooping

Nowadays, the network is getting larger and more complicated. The amount of the PCs always exceeds that of the assigned IP addresses. The wireless network and the laptops are widely used and the locations of the PCs are always changed. Therefore, the corresponding IP address of the PC should be updated with a few configurations. DHCP（Dynamic Host Configuration Protocol, the

159

Image 167

TP-Link TL-SL5428E manual Dhcp Snooping, Start IP Address, End IP Address, Scan

Contents

Rev 1910010529 Copyright & Trademarks Contents Gvrp TC Protect 101 11.4.1 Ntdp 11.4.2VII Package Contents Overview of This Guide About this GuideIntended Readers ConventionsPath Switch, which facilitates you to monitor the Igmp messages Return to Contents Introduction Overview of the SwitchMain Features ¾ LEDs Name Status Indication Appearance DescriptionFront Panel Rear Panel Configuration Login to the SwitchLogin Return to Contents ¾ Port Status SystemSystem Info System SummaryRate ¾ Port InfoPort Type¾ Device Description Device Description¾ Bandwidth Utilization ¾ Time Info ¾ Time ConfigSystem Time System IP User Table User Manage¾ User Info User ConfigUser ID, Name, Access Level and status Operation Config RestorePassword Confirm Password Retype the password¾ Config Backup Config BackupFirmware Upgrade System Reset System RebootAccess Control Access SecurityMAC Address ¾ Access Control Config¾ Session Config IP Address&Mask¾ Access User Number SSL Config¾ Key Download SSH Config¾ Global Config ¾ Certificate DownloadMax Connect Idle TimeoutProtocol ¾ Network Requirements ¾ Configuration ProcedureKey Type DownloadApplication Example 2 for SSH Page Return to Contents Port Select SwitchingPort Config PortFlow Control Port MirrorDescription Speed and DuplexEgress ¾ Mirroring Port¾ Mirrored Port Ingress¾ Port Security Port SecurityLearned Num Port IsolationMax Learned MAC Forward Portlist Display the forwardlist ¾ Port Isolation ConfigForward Portlist Select the port that to be forwarded to ¾ Port Isolation ListLAG Table LAGMember Aggregate Arithmetic¾ LAG Table Group NumberStatic LAG ¾ LAG ConfigLAG will delete this LAG Lacp ConfigPort Priority ¾ Lacp ConfigAdmin Key System Priority¾ Auto Refresh Traffic MonitorTraffic Summary Traffic Statistics MAC Address Address and the port Type Configuration Way Aging outRelationship Bound¾ Address Table ¾ Search Option¾ Create Static Address MAC Address Displays the MAC address learned by the switchStatic Address Displays the corresponding Vlan ID of the MAC address¾ Static Address Table Dynamic Address¾ Dynamic Address Table ¾ Aging ConfigBind Filtering Address¾ Filtering Address Table ¾ Create Filtering AddressVlan implementation Vlan¾ Link Types of ports 802.1Q Vlan¾ Pvid Vlan ConfigMembers Operation ： ¾ Vlan TableVlan ID Select Description ：¾ Vlan Members ¾ Vlan ConfigEnter the ID number of Vlan Is valid or notPort Displays the port number ¾ Vlan Port ConfigVlan Description Required. On the VLAN→802.1Q VLAN→Port Config page, setRequired. On the VLAN→802.1Q VLAN→VLAN Config ¾ Vlan of PortMAC Vlan Optional. On the VLAN→802.1Q VLAN→VLAN ConfigMAC Select Port Enable¾ MAC Vlan Table Protocol Vlan Required. On the VLAN→MAC VLAN→Port Enable¾ Protocol Vlan Table Protocol VlanProtocol Template ¾ Create Protocol Vlan¾ Protocol Template Table ¾ Create Protocol TemplateApplication Example for 802.1Q Vlan Operation Description Required. On VLAN→802.1Q VLAN→Port Config page, configureRequired. On VLAN→802.1Q VLAN→VLAN Config page, create a Application Example for MAC Vlan¾ Network Diagram ¾ Configuration Procedure Application Example for Protocol Vlan Required. On VLAN→Protocol VLAN→Protocol Template Protocol type Value On VLAN→Protocol VLAN→Protocol Vlan page, create protocol¾ VPN Up-link Ports VPN ConfigVlan Mapping ¾ Vlan Mapping Table ¾ Vlan Mapping ConfigRequired. On the VLAN→VLAN VPN→VLAN Mapping Required. On the VLAN→VLAN VPN→VPN ConfigOptional. On the VLAN→VLAN VPN→VPN Config Required. On the VLAN→VLAN VPN→Port Enable¾ Garp Gvrp¾ Gvrp Select Port Status Registration Mode ¾ Port ConfigPrivate Vlan Configuration Procedure¾ Private Vlan Implementation ¾ Features of Private Vlan¾ The Elements of a Private Vlan Pvid ¾ Packet forwarding in Private Vlan Pvlan Secondary Vlan ¾ Create Private Vlan¾ Private Vlan Table Primary VlanRequired. On the VLAN→Private VLAN→PVLAN Port Select the desired port for configuration Port TypeRequired. On the VLAN→Private VLAN→Port Configure ¾ Private Vlan Port TableApplication Example for Private Vlan Required. On the VLAN→802.1Q VLAN→VLAN Config page, click ¾ STP Elements Spanning Tree¾ Bpdu Comparing Principle in STP mode ¾ STP TimersStep Operation ¾ STP Generation¾ Mstp Elements Tips：¾ Rstp Elements ¾ Port Roles ¾ Port StatesSTP Config STP ConfigMax Age Forward DelayVersion Hello TimeSTP Summary STP Summary Port ConfigEdge Port PriorityExtPath IntPathPort Status Region ConfigMstp Instance Port Role¾ Region Config Instance ConfigClear Instance Port Config¾ Instance Table InstancePath Cost Instance IDPort Protect STP Security¾ Bpdu Filter ¾ TC Protect¾ Bpdu Protect Bpdu Protect Loop ProtectRoot Protect TC Protect11 TC Protect TC ProtectOn Spanning Tree→MSTP Instance→Instance On Spanning Tree→STP Config→STP ConfigOn Spanning Tree→STP Config→Port Config Application Example for STP FunctionBridge of Instance Configure Switch D ¾ Suggestion for Configuration ¾ Multicast Address Multicast¾ Multicast Overview Multicast IP Port ¾ Multicast Address Table¾ Igmp Messages Igmp Snooping¾ Igmp Snooping ¾ Igmp Snooping Process¾ Igmp Snooping Fundamentals Snooping ConfigDescription Displays Igmp Snooping status Member ¾ Igmp Snooping StatusFast Leave Igmp SnoopingStatic Router Port Router Port TimeMember Port Time Leave TimeRouter Port Snooping→Snooping Config and Port ConfigMulticast→IGMP Snooping→VLAN Config Multicast Vlan¾ Multicast Vlan Multicast→IGMP Snooping→Multicast Vlan On the Multicast→IGMP Snooping→Snooping ConfigApplication Example for Multicast Vlan VlanMulticast IP ¾ Configuration Procedure Step Operation DescriptionSnooping→Port Config Snooping→Snooping ConfigStatic Multicast IP Multicast IP Table¾ Static Multicast IP Table ¾ Create Static MulticastIP-Range Multicast FilterPort Filter ¾ Port Filter ConfigMulticast→Multicast Filter→Port Filter Packet StatisticsMulticast→Multicast Filter→IP-Range ¾ Igmp Statistics ¾ QoS ¾ Priority ModeQoS 802.1Q frame ¾ Schedule ModeSP-Mode Displays the LAG number which the port belongs to ¾ Port Priority ConfigDiffServ Port Priority¾ Schedule Mode Config Schedule Mode¾ Priority Level ¾ 802.1P Priority Config3 802.1P Priority Dscp Priority Priority levels are labeled as TC0, TC1, TC2 and TC3 ¾ Dscp Priority ConfigIt ranges from 0 to Priority LevelRate Limit ¾ Rate Limit ConfigBandwidth Control Egress Ratebps Storm ControlIngress Rate bps Multicast Rate ¾ Storm Control ConfigBroadcast Rate BpsNumber OUI Address Vendor ¾ Port Voice Vlan ModeVoice Vlan Packet Type Processing Mode ¾ Security Mode of Voice Vlan12 Global Configuration Global Config13 Port Config Port ModeOUI Config Required. On QoS→Voice VLAN→Global Config Required. On VLAN→802.1Q VLAN→Port ConfigOptional. On QoS→Voice VLAN→OUI Config page, you Required. On QoS→Voice VLAN→Port ConfigIndex ACLTime-Range Time-Range SummaryTime-Range Create ¾ Holiday Table ACL ConfigHoliday Config ¾ Create Holiday¾ Create ACL ACL SummaryACL Create ¾ Rule TableEtherType MAC ACL¾ Create MAC ACL Rule IDMask Standard-IP ACL¾ Create Standard-IP ACL Fragment¾ Create Extend-IP ACL Extend-IP ACLPolicy Summary Policy ConfigDesired policy, please click the Delete button Policy CreateAction Create Select Policy¾ Create Action 11 Action Create¾ Policy Bind Table Policy BindingBinding Table Port BindingEnter the ID of the Vlan you want to bind Vlan BindingDirection Displays the binding direction ¾ VLAN-Bind Table Application Example for ACLOn ACL→ACL Config→ACL Create page, create ACL On ACL→ACL Config→Standard-IP ACL page, select ACL IP-MAC Binding Network SecurityManual Binding ¾ Manual Binding Table ¾ Manual Binding OptionEnter the Vlan ID Protect Type Select the Protect Type for the entryARP Scanning Scan Dhcp SnoopingStart IP Address End IP Address¾ Dhcp Working Principle Network diagram for DHCP-snooping implementation¾ Option ¾ Dhcp Cheating Attack Dhcp Cheating Attack Implementation Procedure163 Customization Circuit ID Remote ID ¾ Option 82 Config¾ Port Config Port Select Decline Threshold Decline Flow Control¾ Cheating Gateway ARP Inspection¾ Imitating Gateway ¾ Cheating Terminal Hosts 10 ARP Attack Cheating Gateway¾ Man-In-The-Middle Attack ¾ ARP Flooding Attack ¾ Trusted Port ARP Detect¾ ARP Detect Network Security→ARP ARP DefendRequired. On the Network Security→IP-MAC Speed ARP Statistics¾ ARP Defend Defend¾ Illegal ARP Packet IP Source GuardDoS Defend ¾ IP Source Guard ConfigDoS Attack Type Description DoS Detect DoS DefendAttack Type 11.5Detect Time Detect¾ 802.1X Authentication Procedure ¾ The Mechanism of an 802.1X Authentication System178 179 ¾ Guest Vlan ¾ 802.1X TimerGuest Vlan ID Authentication Method802.1X Guest VlanRetry Times Supplicant TimeoutServer Timeout Authorized Control ModeRadius Server Control TypeRequired. On the Network Security→802.1X→Port On the Network Security→802.1X→Global Config802.1X Client Software Required. On the Network Security→802.1X→Radius¾ Snmp Versions Snmp¾ Snmp Overview ¾ Snmp Management Frame¾ MIB Introduction ¾ Snmp Configuration Outline¾ Remote Engine Snmp Config¾ Local Engine View Name Snmp ViewMIB Object ID View TypeSnmp Group ¾ Group Config¾ Group Table Snmp UserPrivacy Password Auth ModeAuth Password Privacy ModeSnmp Community ¾ Community ConfigAccess ¾ Community Table Required. On the SNMP→SNMP Config→GlobalRequired. On the SNMP→SNMP Config→SNMP MIB ViewNotification On the SNMP→SNMP Config→SNMPRetry TimeoutUDP Port UserRmon Group Function Rmon¾ Rmon Group ¾ History Control Table Event ConfigHistory Control ¾ Event Table Alarm ConfigRising Event VariableSample Type Rising Threshold200 ¾ Cluster Role Cluster¾ Introduction to Cluster 13.1 NDPNeighbor Info ¾ Neighbor Info NDP Summary¾ Neighbor NDP ¾ Port Status Displays the port number of the switchAging Time NDP ConfigDetail ： Displays NDP status of the current port Port Displays the port number of the switchNtdp Device TableNtdp Summary Ntdp Summary Ntdp Hops Ntdp ConfigNtdp Interval Time Cluster Summary EnableCluster ¾ Member Info ¾ Global Config Cluster¾ Cluster Config ¾ Global Cluster11 Cluster Summary for Member Switch Switch¾ Role Change Cluster Config¾ Current Role 14 Cluster Configuration for Commander Switch 16 Cluster Configuration for Individual Switch Member ConfigMember MAC Cluster Topology¾ Create Member Device Name¾ Graphic Show 18 Collect TopologyApplication Example for Cluster Function On Cluster→NTDP→NTDP Config page, enable On Cluster→NDP→NDP Config page, enable NDP220 CPU Monitor MaintenanceSystem Monitor Memory Monitor 14.2 Log Module ContentLog Table TimeLog Buffer ¾ Local Log ConfigLocal Log Remote LogHost IP Backup Log¾ Log Host ¾ Cable Test ¾ Backup LogDevice Diagnose Cable TestLength ErrorSwitch is available LoopbackTest ¾ Ping ConfigNetwork Diagnose PingTracert ¾ Tracert ConfigConfigure the Hyper Terminal System Maintenance via FTPHardware Installation 232 5Port Settings Download Firmware via bootrom menuTP-LINK upgrade You can only use the port 1 to upgrade TP-LINK ifconfig ip 172.31.70.22 mask 255.255.255.0 gatewayTP-LINK start Start User Access Login Appendix a Specifications Configure TCP/IP component Appendix B Configuring the PCs238 Now Appendix C 802.1X Client Software Installation Guide241 242 Figure C-7 InstallShield Wizard Complete Uninstall SoftwareFigure C-10 Uninstall Complete Configuration245 Figure C-15 Connection Status FAQ Appendix D Glossary Ieee 802.1Q Multicast SwitchingGroup Attribute Registration Protocol Garp Ieee 802.1DLink Aggregation Control Protocol Lacp Port AuthenticationRemote Authentication Dial-in User Service Radius Link AggregationTelnet Simple Network Management Protocol SnmpSimple Network Time Protocol Sntp Spanning Tree Algorithm STA