Filtering Address, Bind | TP-Link TL-SL5428E specification

Select:	Select the entry to delete the dynamic address or to bind the MAC
	address to the corresponding port statically. It is multi-optional.
MAC Address:	Displays the dynamic MAC Address.
VLAN ID:	Displays the corresponding VLAN ID of the MAC address.
Port:	Displays the corresponding port number of the MAC address.
Type:	Displays the Type of the MAC address.
Aging Status:	Displays the Aging Status of the MAC address.
Bind:	Click the Bind button to bind the MAC address of your selected entry
	to the corresponding port statically.

Tips:

Setting aging time properly helps implement effective MAC address aging. The aging time that is too long or too short results decreases the performance of the switch. If the aging time is too long, excessive invalid MAC address entries maintained by the switch may fill up the MAC address table. This prevents the MAC address table from updating with network changes in time. If the aging time is too short, the switch may remove valid MAC address entries. This decreases the forwarding performance of the switch. It is recommended to keep the default value.

5.4.4 Filtering Address

The filtering address is to forbid the undesired packets to be forwarded. The filtering address can be added or removed manually, independent of the aging time. The filtering MAC address allows the switch to filter the packets which includes this MAC address as the source address or destination address, so as to guarantee the network security. The filtering MAC address entries act on all the ports in the corresponding VLAN.

Choose the menu Switching→MAC Address→Filtering Address to load the following page.

Figure 5-14 Filtering Address

49

Image 57

TP-Link TL-SL5428E manual Filtering Address, Bind

Contents

Rev 1910010529 Copyright & Trademarks Contents Gvrp TC Protect 101 11.4.1 Ntdp 11.4.2 VII Package Contents Intended Readers About this GuideConventions Overview of This Guide Path Switch, which facilitates you to monitor the Igmp messages Return to Contents Overview of the Switch Main FeaturesIntroduction Appearance Description Front Panel¾ LEDs Name Status Indication Rear Panel Login to the Switch LoginConfiguration Return to Contents System Info SystemSystem Summary ¾ Port Status Port ¾ Port InfoType Rate Device Description ¾ Bandwidth Utilization¾ Device Description ¾ Time Config System Time¾ Time Info System IP User Table User Manage ¾ User Info User Config Password Config RestoreConfirm Password Retype the password User ID, Name, Access Level and status Operation Config Backup Firmware Upgrade¾ Config Backup System Reset System Reboot Access Control Access Security ¾ Session Config ¾ Access Control ConfigIP Address&Mask MAC Address ¾ Access User Number SSL Config ¾ Global Config SSH Config¾ Certificate Download ¾ Key Download Idle Timeout ProtocolMax Connect Key Type ¾ Configuration ProcedureDownload ¾ Network Requirements Application Example 2 for SSH Page Return to Contents Port Config SwitchingPort Port Select Description Port MirrorSpeed and Duplex Flow Control ¾ Mirrored Port ¾ Mirroring PortIngress Egress ¾ Port Security Port Security Port Isolation Max Learned MACLearned Num Forward Portlist Select the port that to be forwarded to ¾ Port Isolation Config¾ Port Isolation List Forward Portlist Display the forwardlist LAG Table LAG ¾ LAG Table Aggregate ArithmeticGroup Number Member Static LAG ¾ LAG Config LAG will delete this LAG Lacp Config Admin Key ¾ Lacp ConfigSystem Priority Port Priority Traffic Monitor Traffic Summary¾ Auto Refresh Traffic Statistics MAC Address Relationship Type Configuration Way Aging outBound Address and the port ¾ Address Table ¾ Search Option Static Address MAC Address Displays the MAC address learned by the switchDisplays the corresponding Vlan ID of the MAC address ¾ Create Static Address ¾ Static Address Table Dynamic Address ¾ Dynamic Address Table ¾ Aging Config Bind Filtering Address ¾ Filtering Address Table ¾ Create Filtering Address Vlan implementation Vlan ¾ Link Types of ports 802.1Q Vlan ¾ Pvid Vlan Config Vlan ID Select ¾ Vlan TableDescription ： Members Operation ： Enter the ID number of Vlan ¾ Vlan ConfigIs valid or not ¾ Vlan Members Port Displays the port number ¾ Vlan Port Config Required. On the VLAN→802.1Q VLAN→VLAN Config Required. On the VLAN→802.1Q VLAN→Port Config page, set¾ Vlan of Port Vlan Description MAC Vlan Optional. On the VLAN→802.1Q VLAN→VLAN Config Port Enable ¾ MAC Vlan TableMAC Select Protocol Vlan Required. On the VLAN→MAC VLAN→Port Enable Protocol Template Protocol Vlan¾ Create Protocol Vlan ¾ Protocol Vlan Table ¾ Protocol Template Table ¾ Create Protocol Template Application Example for 802.1Q Vlan Required. On VLAN→802.1Q VLAN→VLAN Config page, create a Required. On VLAN→802.1Q VLAN→Port Config page, configureApplication Example for MAC Vlan Operation Description ¾ Network Diagram ¾ Configuration Procedure Application Example for Protocol Vlan Required. On VLAN→Protocol VLAN→Protocol Template Protocol type Value On VLAN→Protocol VLAN→Protocol Vlan page, create protocol VPN Config Vlan Mapping¾ VPN Up-link Ports ¾ Vlan Mapping Table ¾ Vlan Mapping Config Optional. On the VLAN→VLAN VPN→VPN Config Required. On the VLAN→VLAN VPN→VPN ConfigRequired. On the VLAN→VLAN VPN→Port Enable Required. On the VLAN→VLAN VPN→VLAN Mapping ¾ Garp Gvrp ¾ Gvrp Select Port Status Registration Mode ¾ Port Config Private Vlan Configuration Procedure ¾ Features of Private Vlan ¾ The Elements of a Private Vlan¾ Private Vlan Implementation Pvid ¾ Packet forwarding in Private Vlan Pvlan ¾ Private Vlan Table ¾ Create Private VlanPrimary Vlan Secondary Vlan Required. On the VLAN→Private VLAN→Port Configure Port Select the desired port for configuration Port Type¾ Private Vlan Port Table Required. On the VLAN→Private VLAN→PVLAN Application Example for Private Vlan Required. On the VLAN→802.1Q VLAN→VLAN Config page, click ¾ STP Elements Spanning Tree ¾ Bpdu Comparing Principle in STP mode ¾ STP Timers Step Operation ¾ STP Generation Tips： ¾ Rstp Elements¾ Mstp Elements ¾ Port Roles ¾ Port States STP Config STP Config Version Forward DelayHello Time Max Age STP Summary STP Summary Port Config ExtPath PriorityIntPath Edge Port Mstp Instance Region ConfigPort Role Port Status ¾ Region Config Instance Config ¾ Instance Table Instance Port ConfigInstance Clear Path Cost Instance ID Port Protect STP Security ¾ TC Protect ¾ Bpdu Protect¾ Bpdu Filter Root Protect Loop ProtectTC Protect Bpdu Protect 11 TC Protect TC Protect On Spanning Tree→STP Config→Port Config On Spanning Tree→STP Config→STP ConfigApplication Example for STP Function On Spanning Tree→MSTP Instance→Instance Bridge of Instance Configure Switch D ¾ Suggestion for Configuration Multicast ¾ Multicast Overview¾ Multicast Address Multicast IP Port ¾ Multicast Address Table ¾ Igmp Snooping Igmp Snooping¾ Igmp Snooping Process ¾ Igmp Messages ¾ Igmp Snooping Fundamentals Snooping Config Description Displays Igmp Snooping status Member ¾ Igmp Snooping Status Fast Leave Igmp Snooping Member Port Time Router Port TimeLeave Time Static Router Port Multicast→IGMP Snooping→VLAN Config Snooping→Snooping Config and Port ConfigMulticast Vlan Router Port ¾ Multicast Vlan Application Example for Multicast Vlan On the Multicast→IGMP Snooping→Snooping ConfigVlan Multicast→IGMP Snooping→Multicast Vlan Snooping→Port Config ¾ Configuration Procedure Step Operation DescriptionSnooping→Snooping Config Multicast IP Static Multicast IP Multicast IP Table ¾ Static Multicast IP Table ¾ Create Static Multicast IP-Range Multicast Filter Port Filter ¾ Port Filter Config Packet Statistics Multicast→Multicast Filter→IP-RangeMulticast→Multicast Filter→Port Filter ¾ Igmp Statistics ¾ Priority Mode QoS¾ QoS 802.1Q frame ¾ Schedule Mode SP-Mode DiffServ ¾ Port Priority ConfigPort Priority Displays the LAG number which the port belongs to ¾ Schedule Mode Config Schedule Mode ¾ 802.1P Priority Config 3 802.1P Priority¾ Priority Level Dscp Priority It ranges from 0 to ¾ Dscp Priority ConfigPriority Level Priority levels are labeled as TC0, TC1, TC2 and TC3 ¾ Rate Limit Config Bandwidth ControlRate Limit Storm Control Ingress Rate bpsEgress Ratebps Broadcast Rate ¾ Storm Control ConfigBps Multicast Rate ¾ Port Voice Vlan Mode Voice VlanNumber OUI Address Vendor Packet Type Processing Mode ¾ Security Mode of Voice Vlan 12 Global Configuration Global Config 13 Port Config Port Mode OUI Config Optional. On QoS→Voice VLAN→OUI Config page, you Required. On VLAN→802.1Q VLAN→Port ConfigRequired. On QoS→Voice VLAN→Port Config Required. On QoS→Voice VLAN→Global Config Time-Range ACLTime-Range Summary Index Time-Range Create Holiday Config ACL Config¾ Create Holiday ¾ Holiday Table ACL Create ACL Summary¾ Rule Table ¾ Create ACL ¾ Create MAC ACL MAC ACLRule ID EtherType ¾ Create Standard-IP ACL Standard-IP ACLFragment Mask ¾ Create Extend-IP ACL Extend-IP ACL Policy Summary Policy Config Action Create Policy CreateSelect Policy Desired policy, please click the Delete button ¾ Create Action 11 Action Create Binding Table Policy BindingPort Binding ¾ Policy Bind Table Vlan Binding Direction Displays the binding directionEnter the ID of the Vlan you want to bind ¾ VLAN-Bind Table Application Example for ACL On ACL→ACL Config→ACL Create page, create ACL On ACL→ACL Config→Standard-IP ACL page, select ACL IP-MAC Binding Network Security Manual Binding Enter the Vlan ID ¾ Manual Binding OptionProtect Type Select the Protect Type for the entry ¾ Manual Binding Table ARP Scanning Start IP Address Dhcp SnoopingEnd IP Address Scan ¾ Dhcp Working Principle Network diagram for DHCP-snooping implementation ¾ Option ¾ Dhcp Cheating Attack Dhcp Cheating Attack Implementation Procedure 163 ¾ Port Config Port Select ¾ Option 82 ConfigDecline Threshold Decline Flow Control Customization Circuit ID Remote ID ARP Inspection ¾ Imitating Gateway¾ Cheating Gateway ¾ Cheating Terminal Hosts 10 ARP Attack Cheating Gateway ¾ Man-In-The-Middle Attack ¾ ARP Flooding Attack ARP Detect ¾ ARP Detect¾ Trusted Port ARP Defend Required. On the Network Security→IP-MACNetwork Security→ARP ¾ ARP Defend ARP StatisticsDefend Speed ¾ Illegal ARP Packet IP Source Guard DoS Defend ¾ IP Source Guard Config DoS Attack Type Description DoS Detect DoS Defend Detect Time 11.5Detect Attack Type ¾ 802.1X Authentication Procedure ¾ The Mechanism of an 802.1X Authentication System 178 179 ¾ Guest Vlan ¾ 802.1X Timer 802.1X Authentication MethodGuest Vlan Guest Vlan ID Supplicant Timeout Server TimeoutRetry Times Radius Server Control ModeControl Type Authorized 802.1X Client Software On the Network Security→802.1X→Global ConfigRequired. On the Network Security→802.1X→Radius Required. On the Network Security→802.1X→Port ¾ Snmp Overview Snmp¾ Snmp Management Frame ¾ Snmp Versions ¾ MIB Introduction ¾ Snmp Configuration Outline Snmp Config ¾ Local Engine¾ Remote Engine MIB Object ID Snmp ViewView Type View Name Snmp Group ¾ Group Config ¾ Group Table Snmp User Auth Password Auth ModePrivacy Mode Privacy Password ¾ Community Config AccessSnmp Community Required. On the SNMP→SNMP Config→SNMP Required. On the SNMP→SNMP Config→GlobalMIB View ¾ Community Table Notification On the SNMP→SNMP Config→SNMP UDP Port TimeoutUser Retry Rmon ¾ Rmon GroupRmon Group Function Event Config History Control¾ History Control Table ¾ Event Table Alarm Config Sample Type VariableRising Threshold Rising Event 200 ¾ Cluster Role Cluster 13.1 NDP Neighbor Info¾ Introduction to Cluster NDP Summary ¾ Neighbor¾ Neighbor Info NDP ¾ Port Status Displays the port number of the switch NDP Config Detail ：Aging Time Ntdp Port Displays the port number of the switchDevice Table Displays NDP status of the current port Ntdp Summary Ntdp Summary Ntdp Config Ntdp Interval TimeNtdp Hops Enable ClusterCluster Summary ¾ Cluster Config ¾ Global Config Cluster¾ Global Cluster ¾ Member Info 11 Cluster Summary for Member Switch Switch Cluster Config ¾ Current Role¾ Role Change 14 Cluster Configuration for Commander Switch 16 Cluster Configuration for Individual Switch Member Config ¾ Create Member Cluster TopologyDevice Name Member MAC ¾ Graphic Show 18 Collect Topology Application Example for Cluster Function On Cluster→NTDP→NTDP Config page, enable On Cluster→NDP→NDP Config page, enable NDP 220 Maintenance System MonitorCPU Monitor Memory Monitor 14.2 Log Log Table ContentTime Module Local Log ¾ Local Log ConfigRemote Log Log Buffer Backup Log ¾ Log HostHost IP Device Diagnose ¾ Backup LogCable Test ¾ Cable Test Switch is available ErrorLoopback Length Network Diagnose ¾ Ping ConfigPing Test Tracert ¾ Tracert Config System Maintenance via FTP Hardware InstallationConfigure the Hyper Terminal 232 5Port Settings Download Firmware via bootrom menu TP-LINK upgrade You can only use the port 1 to upgrade TP-LINK ifconfig ip 172.31.70.22 mask 255.255.255.0 gateway TP-LINK start Start User Access Login Appendix a Specifications Configure TCP/IP component Appendix B Configuring the PCs 238 Now Appendix C 802.1X Client Software Installation Guide 241 242 Figure C-7 InstallShield Wizard Complete Uninstall Software Figure C-10 Uninstall Complete Configuration 245 Figure C-15 Connection Status FAQ Appendix D Glossary Group Attribute Registration Protocol Garp Multicast SwitchingIeee 802.1D Ieee 802.1Q Remote Authentication Dial-in User Service Radius Port AuthenticationLink Aggregation Link Aggregation Control Protocol Lacp Simple Network Time Protocol Sntp Simple Network Management Protocol SnmpSpanning Tree Algorithm STA Telnet