Manual Binding | TP-Link TL-SL5428E guide

The following entries are displayed on this screen:

¾Search Option

Source:	Select a Source from the pull-down list and click the Search
	button to view your desired entry in the Binding Table.
	• All: All the bound entries will be displayed.
	• Manual: Only the manually added entries will be
	displayed.
	• Scanning: Only the entries formed via ARP Scanning will
	be displayed.
	• Snooping: Only the entries formed via DHCP Snooping
	will be displayed.
¾ Binding Table
IP Select:	Click the Select button to quick-select the corresponding entry
	based on the IP address you entered.
Select:	Select the desired entry to modify the Host Name and Protect
	Type. It is multi-optional.
Host Name:	Displays the Host Name here.
IP Address:	Displays the IP Address of the Host.
MAC Address:	Displays the MAC Address of the Host.
VLAN ID:	Displays the VLAN ID here.
Port:	Displays the number of port connected to the Host.
Protect Type:	Allows you to view and modify the Protect Type of the entry.
Source:	Displays the Source of the entry.
Collision:	Displays the Collision status of the entry.
	•Warning: Indicates that the collision may be caused by
	the MSTP function.
	•Critical: Indicates that the entry has a collision with the
	other entries.

Note:

1Among the entries with Critical collision level, the one with the highest Source priority will take effect.

2Among the conflicting entries with the same Source priority, only the last added or edited one will take effect.

11.1.2 Manual Binding

You can manually bind the IP address, MAC address, VLAN ID and the Port number together in the condition that you have got the related information of the Hosts in the LAN.

Choose the menu Network Security→IP-MAC Binding→Manual Binding to load the following page.

156

Image 164

TP-Link TL-SL5428E manual Manual Binding

Contents

Rev 1910010529 Copyright & Trademarks Contents Gvrp TC Protect 101 11.4.1 11.4.2 Ntdp VII Package Contents About this Guide Intended ReadersConventions Overview of This Guide Path Switch, which facilitates you to monitor the Igmp messages Return to Contents Introduction Overview of the SwitchMain Features ¾ LEDs Name Status Indication Appearance DescriptionFront Panel Rear Panel Configuration Login to the SwitchLogin Return to Contents System System InfoSystem Summary ¾ Port Status ¾ Port Info PortType Rate ¾ Device Description Device Description¾ Bandwidth Utilization ¾ Time Info ¾ Time ConfigSystem Time System IP User Manage User Table User Config ¾ User Info Config Restore PasswordConfirm Password Retype the password User ID, Name, Access Level and status Operation ¾ Config Backup Config BackupFirmware Upgrade System Reboot System Reset Access Security Access Control ¾ Access Control Config ¾ Session ConfigIP Address&Mask MAC Address SSL Config ¾ Access User Number SSH Config ¾ Global Config¾ Certificate Download ¾ Key Download Max Connect Idle TimeoutProtocol ¾ Configuration Procedure Key TypeDownload ¾ Network Requirements Application Example 2 for SSH Page Return to Contents Switching Port ConfigPort Port Select Port Mirror DescriptionSpeed and Duplex Flow Control ¾ Mirroring Port ¾ Mirrored PortIngress Egress Port Security ¾ Port Security Learned Num Port IsolationMax Learned MAC ¾ Port Isolation Config Forward Portlist Select the port that to be forwarded to¾ Port Isolation List Forward Portlist Display the forwardlist LAG LAG Table Aggregate Arithmetic ¾ LAG TableGroup Number Member ¾ LAG Config Static LAG Lacp Config LAG will delete this LAG ¾ Lacp Config Admin KeySystem Priority Port Priority ¾ Auto Refresh Traffic MonitorTraffic Summary Traffic Statistics MAC Address Type Configuration Way Aging out RelationshipBound Address and the port ¾ Search Option ¾ Address Table MAC Address Displays the MAC address learned by the switch Static AddressDisplays the corresponding Vlan ID of the MAC address ¾ Create Static Address Dynamic Address ¾ Static Address Table ¾ Aging Config ¾ Dynamic Address Table Filtering Address Bind ¾ Create Filtering Address ¾ Filtering Address Table Vlan Vlan implementation 802.1Q Vlan ¾ Link Types of ports Vlan Config ¾ Pvid ¾ Vlan Table Vlan ID SelectDescription ： Members Operation ： ¾ Vlan Config Enter the ID number of VlanIs valid or not ¾ Vlan Members ¾ Vlan Port Config Port Displays the port number Required. On the VLAN→802.1Q VLAN→Port Config page, set Required. On the VLAN→802.1Q VLAN→VLAN Config¾ Vlan of Port Vlan Description Optional. On the VLAN→802.1Q VLAN→VLAN Config MAC Vlan MAC Select Port Enable¾ MAC Vlan Table Required. On the VLAN→MAC VLAN→Port Enable Protocol Vlan Protocol Vlan Protocol Template¾ Create Protocol Vlan ¾ Protocol Vlan Table ¾ Create Protocol Template ¾ Protocol Template Table Application Example for 802.1Q Vlan Required. On VLAN→802.1Q VLAN→Port Config page, configure Required. On VLAN→802.1Q VLAN→VLAN Config page, create aApplication Example for MAC Vlan Operation Description ¾ Network Diagram ¾ Configuration Procedure Application Example for Protocol Vlan Required. On VLAN→Protocol VLAN→Protocol Template On VLAN→Protocol VLAN→Protocol Vlan page, create protocol Protocol type Value ¾ VPN Up-link Ports VPN ConfigVlan Mapping ¾ Vlan Mapping Config ¾ Vlan Mapping Table Required. On the VLAN→VLAN VPN→VPN Config Optional. On the VLAN→VLAN VPN→VPN ConfigRequired. On the VLAN→VLAN VPN→Port Enable Required. On the VLAN→VLAN VPN→VLAN Mapping Gvrp ¾ Garp ¾ Gvrp ¾ Port Config Select Port Status Registration Mode Configuration Procedure Private Vlan ¾ Private Vlan Implementation ¾ Features of Private Vlan¾ The Elements of a Private Vlan Pvid ¾ Packet forwarding in Private Vlan Pvlan ¾ Create Private Vlan ¾ Private Vlan TablePrimary Vlan Secondary Vlan Port Select the desired port for configuration Port Type Required. On the VLAN→Private VLAN→Port Configure¾ Private Vlan Port Table Required. On the VLAN→Private VLAN→PVLAN Application Example for Private Vlan Required. On the VLAN→802.1Q VLAN→VLAN Config page, click Spanning Tree ¾ STP Elements ¾ STP Timers ¾ Bpdu Comparing Principle in STP mode ¾ STP Generation Step Operation ¾ Mstp Elements Tips：¾ Rstp Elements ¾ Port States ¾ Port Roles STP Config STP Config Forward Delay VersionHello Time Max Age STP Summary Port Config STP Summary Priority ExtPathIntPath Edge Port Region Config Mstp InstancePort Role Port Status Instance Config ¾ Region Config Instance Port Config ¾ Instance TableInstance Clear Instance ID Path Cost STP Security Port Protect ¾ Bpdu Filter ¾ TC Protect¾ Bpdu Protect Loop Protect Root ProtectTC Protect Bpdu Protect TC Protect 11 TC Protect On Spanning Tree→STP Config→STP Config On Spanning Tree→STP Config→Port ConfigApplication Example for STP Function On Spanning Tree→MSTP Instance→Instance Bridge of Instance Configure Switch D ¾ Suggestion for Configuration ¾ Multicast Address Multicast¾ Multicast Overview ¾ Multicast Address Table Multicast IP Port Igmp Snooping ¾ Igmp Snooping¾ Igmp Snooping Process ¾ Igmp Messages Snooping Config ¾ Igmp Snooping Fundamentals ¾ Igmp Snooping Status Description Displays Igmp Snooping status Member Igmp Snooping Fast Leave Router Port Time Member Port TimeLeave Time Static Router Port Snooping→Snooping Config and Port Config Multicast→IGMP Snooping→VLAN ConfigMulticast Vlan Router Port ¾ Multicast Vlan On the Multicast→IGMP Snooping→Snooping Config Application Example for Multicast VlanVlan Multicast→IGMP Snooping→Multicast Vlan ¾ Configuration Procedure Step Operation Description Snooping→Port ConfigSnooping→Snooping Config Multicast IP Multicast IP Table Static Multicast IP ¾ Create Static Multicast ¾ Static Multicast IP Table Multicast Filter IP-Range ¾ Port Filter Config Port Filter Multicast→Multicast Filter→Port Filter Packet StatisticsMulticast→Multicast Filter→IP-Range ¾ Igmp Statistics ¾ QoS ¾ Priority ModeQoS ¾ Schedule Mode 802.1Q frame SP-Mode ¾ Port Priority Config DiffServPort Priority Displays the LAG number which the port belongs to Schedule Mode ¾ Schedule Mode Config ¾ Priority Level ¾ 802.1P Priority Config3 802.1P Priority Dscp Priority ¾ Dscp Priority Config It ranges from 0 toPriority Level Priority levels are labeled as TC0, TC1, TC2 and TC3 Rate Limit ¾ Rate Limit ConfigBandwidth Control Egress Ratebps Storm ControlIngress Rate bps ¾ Storm Control Config Broadcast RateBps Multicast Rate Number OUI Address Vendor ¾ Port Voice Vlan ModeVoice Vlan ¾ Security Mode of Voice Vlan Packet Type Processing Mode Global Config 12 Global Configuration Port Mode 13 Port Config OUI Config Required. On VLAN→802.1Q VLAN→Port Config Optional. On QoS→Voice VLAN→OUI Config page, youRequired. On QoS→Voice VLAN→Port Config Required. On QoS→Voice VLAN→Global Config ACL Time-RangeTime-Range Summary Index Time-Range Create ACL Config Holiday Config¾ Create Holiday ¾ Holiday Table ACL Summary ACL Create¾ Rule Table ¾ Create ACL MAC ACL ¾ Create MAC ACLRule ID EtherType Standard-IP ACL ¾ Create Standard-IP ACLFragment Mask Extend-IP ACL ¾ Create Extend-IP ACL Policy Config Policy Summary Policy Create Action CreateSelect Policy Desired policy, please click the Delete button 11 Action Create ¾ Create Action Policy Binding Binding TablePort Binding ¾ Policy Bind Table Enter the ID of the Vlan you want to bind Vlan BindingDirection Displays the binding direction Application Example for ACL ¾ VLAN-Bind Table On ACL→ACL Config→ACL Create page, create ACL On ACL→ACL Config→Standard-IP ACL page, select ACL Network Security IP-MAC Binding Manual Binding ¾ Manual Binding Option Enter the Vlan IDProtect Type Select the Protect Type for the entry ¾ Manual Binding Table ARP Scanning Dhcp Snooping Start IP AddressEnd IP Address Scan Network diagram for DHCP-snooping implementation ¾ Dhcp Working Principle ¾ Option Dhcp Cheating Attack Implementation Procedure ¾ Dhcp Cheating Attack 163 ¾ Option 82 Config ¾ Port Config Port SelectDecline Threshold Decline Flow Control Customization Circuit ID Remote ID ¾ Cheating Gateway ARP Inspection¾ Imitating Gateway 10 ARP Attack Cheating Gateway ¾ Cheating Terminal Hosts ¾ Man-In-The-Middle Attack ¾ ARP Flooding Attack ¾ Trusted Port ARP Detect¾ ARP Detect Network Security→ARP ARP DefendRequired. On the Network Security→IP-MAC ARP Statistics ¾ ARP DefendDefend Speed IP Source Guard ¾ Illegal ARP Packet ¾ IP Source Guard Config DoS Defend DoS Attack Type Description DoS Defend DoS Detect 11.5 Detect TimeDetect Attack Type ¾ The Mechanism of an 802.1X Authentication System ¾ 802.1X Authentication Procedure 178 179 ¾ 802.1X Timer ¾ Guest Vlan Authentication Method 802.1XGuest Vlan Guest Vlan ID Retry Times Supplicant TimeoutServer Timeout Control Mode Radius ServerControl Type Authorized On the Network Security→802.1X→Global Config 802.1X Client SoftwareRequired. On the Network Security→802.1X→Radius Required. On the Network Security→802.1X→Port Snmp ¾ Snmp Overview¾ Snmp Management Frame ¾ Snmp Versions ¾ Snmp Configuration Outline ¾ MIB Introduction ¾ Remote Engine Snmp Config¾ Local Engine Snmp View MIB Object IDView Type View Name ¾ Group Config Snmp Group Snmp User ¾ Group Table Auth Mode Auth PasswordPrivacy Mode Privacy Password Snmp Community ¾ Community ConfigAccess Required. On the SNMP→SNMP Config→Global Required. On the SNMP→SNMP Config→SNMPMIB View ¾ Community Table On the SNMP→SNMP Config→SNMP Notification Timeout UDP PortUser Retry Rmon Group Function Rmon¾ Rmon Group ¾ History Control Table Event ConfigHistory Control Alarm Config ¾ Event Table Variable Sample TypeRising Threshold Rising Event 200 Cluster ¾ Cluster Role ¾ Introduction to Cluster 13.1 NDPNeighbor Info ¾ Neighbor Info NDP Summary¾ Neighbor ¾ Port Status Displays the port number of the switch NDP Aging Time NDP ConfigDetail ： Port Displays the port number of the switch NtdpDevice Table Displays NDP status of the current port Ntdp Summary Ntdp Summary Ntdp Hops Ntdp ConfigNtdp Interval Time Cluster Summary EnableCluster ¾ Global Config Cluster ¾ Cluster Config¾ Global Cluster ¾ Member Info Switch 11 Cluster Summary for Member Switch ¾ Role Change Cluster Config¾ Current Role 14 Cluster Configuration for Commander Switch Member Config 16 Cluster Configuration for Individual Switch Cluster Topology ¾ Create MemberDevice Name Member MAC 18 Collect Topology ¾ Graphic Show Application Example for Cluster Function On Cluster→NDP→NDP Config page, enable NDP On Cluster→NTDP→NTDP Config page, enable 220 CPU Monitor MaintenanceSystem Monitor Memory Monitor 14.2 Log Content Log TableTime Module ¾ Local Log Config Local LogRemote Log Log Buffer Host IP Backup Log¾ Log Host ¾ Backup Log Device DiagnoseCable Test ¾ Cable Test Error Switch is availableLoopback Length ¾ Ping Config Network DiagnosePing Test ¾ Tracert Config Tracert Configure the Hyper Terminal System Maintenance via FTPHardware Installation 232 Download Firmware via bootrom menu 5Port Settings TP-LINK ifconfig ip 172.31.70.22 mask 255.255.255.0 gateway TP-LINK upgrade You can only use the port 1 to upgrade TP-LINK start Start User Access Login Appendix a Specifications Appendix B Configuring the PCs Configure TCP/IP component 238 Now Installation Guide Appendix C 802.1X Client Software 241 242 Uninstall Software Figure C-7 InstallShield Wizard Complete Configuration Figure C-10 Uninstall Complete 245 Figure C-15 Connection Status FAQ Appendix D Glossary Multicast Switching Group Attribute Registration Protocol GarpIeee 802.1D Ieee 802.1Q Port Authentication Remote Authentication Dial-in User Service RadiusLink Aggregation Link Aggregation Control Protocol Lacp Simple Network Management Protocol Snmp Simple Network Time Protocol SntpSpanning Tree Algorithm STA Telnet