Features and |
|
Benefits |
|
|
|
|
|
The 10 and
Flexibility
Footprint
Central to the design of any project is the operating envelope of the
LessWeight
These lightweight models afford less stress on building supports and greater handling ease.
Installation
Installation time and effort are reduced when dealing with a significantly smaller and lighter unit. In addition, having electrical and water connections on the same side of the unit and a
Ease of Service
The control panel and unit panels are completely removable for service accessibility and convenience.
ICS Interface
Communication withTraneTracer™ or Tracker™ is possible through the ICS Interface on the 10 and 15 ton Cold Generator chiller.
Optional Features
•Hot Gas Bypass — Allows unit operation below the minimum step of unloading.
•Low Ambient Head Pressure Control
— Modulates the rpm of the fan motor in response to outdoor ambient temperature and unit head pressure. Provides unit cooling operation down to outdoor temperatures of 0°F.
•Coil Guard — Metal grille with PVC coating to protect the condenser coil.
•Isolation — Neoprene in shear or spring flex isolators.
•Power Supply Monitor — Provides protection against phase loss, phase reversal, phase imbalance, incorrect phase sequence and low line voltage.
•ElapsedTime Meter/Number Starts Counter — Records number of compressor starts and operating hours.
•Flow Switch — Required as a safety interlock to prevent operation of unit without evaporator flow (available option for field installation only).
•Integrated Comfort Systems (ICS) Interface — Provides the ability to communicate withTraneTracer or Tracker building management systems via aThermostat Control Module — (TCM).
•Gauges — Monitor suction and discharge pressures.
5 |