Trane Modu manual BAYSENS019 Icon Descriptions

Installation Programming

Figure I-P-9.BAYSENS019 complete icon display.

Icon Descriptions

BAYSENS019 Icon Descriptions

Refer to Figure I-P-9 for a pictorial view of the written descriptions below.

1.The four periods of the day used only during programming mode.

2.The seven days of the week used during programming and in normal mode to display the day (not current in Program Menu).

3.Four digits used to display the time of day in normal run mode. Also used in Programming Menu andTemporary manual Override Menu, and options menu.

4.Time of day colon used on the time of day clock. The colon blinks to indicate the UCM system is functional.

5.AM and PM are used to indicate the time of day when using a 12 hour clock. AM and PM are not used when a 24 hour clock is selected.

6.DAYS and HOURS are used to set the override timer period.

7.Displayed in temporary manual OVERRIDE mode, and when setting the override timer.

8.Only used when setting the override timer.

9.Displays the desired state of either OCCUPIED or UNOCCUPIED.

10.The padlock symbol indicates that the keyboard lockout is in effect.

11.This extends the mode selection box in order to accommodate the emergency heat mode on the ZSM heat pump version.

12.Fan mode selection box.

13.Displayed in normal run mode when displaying the actual room temperature.

14.Displayed in option setting mode only.

15.Digits used to display temperature.

16.HEAT and COOL have two functions: they indicate UCM status in normal run mode and indicate which type of setpoint is DESIRED during programming and override setting.

17.Only used during programming and override setting to indicate the DESIRED setpoint temperature.

18.Flashes when check filter timer is elapsed.

19.Flashing cooling fail status indicator.

20.Only used during UCP self-test mode.

21.Flashing service status indicator and fan failure.

22.Flashing heating fail status indicator.

23.Operating MODE selection box.

SCXG-SVX01B-EN 71