Trane TSC060-120 manual Jobsite Connections, Zone Sensors - Typical Number Of Wires

Jobsite Connections

DISCONNECT

SWITCH

(BY OTHERS)

ZONE SENSOR

OR THERMOSTAT

ROOFTOP

UNIT

Zone Sensors — Typical Number Of Wires

A — Manual Changeover . . . . . . . . . . . . . . . . . 4 Manual/Auto Changeover . . . . . . . . . . . . . 5 Manual/Auto Changeover with

Status Indication LED’s . . . . . . . . . . . . . 10 Programmable Night Setback with

Status Indication LED’s . . . . . . . . . . . . . . 7

Thermostats — Typical Number of Wires A — 3 wires, 24-volts, Cooling Only

4 wires, 24-volts, with Electric Heat

B — 3 Power Wires + 1 Ground Wire (three phase) 2 Power Wires + 1 Ground Wire (single phase)

For specific wiring information, see the installation instructions. All wiring except power wires is low voltage.

All customer supplied wiring to be copper and must conform to NEC or CEC and local electrical codes. Wiring shown dotted is to be furnished and installed by the customer.

RT-PRC016-EN 35