Manuals / TRENDnet / Computer Equipment / Network Card

TRENDnet TEW-603PI manual The SiteSurvey Screen

Models: TEW-603PI

1 44

Download 44 pages 55 Kb

Page 23

The SiteSurvey Screen

PROFILE LIST

The Profile List pane settings are described below.

	Name	Shows the name of the profile that you assigned. If only default
		displays, no profiles have been added.

	SSID	Shows the name (usually the equipment vendor's name)
		assigned to a wireless Wi-Fi network. (The keyword “ANY”
		means any available network.)
	IP Address	Shows the IP address.

	Add (button)	Click to add a profile.

	Remove (button)	Click to remove the selected profile.

	Properties (button)	Click to view properties for the selected profile.

	Apply (button)	Click to apply changes after modifying settings.
	Up (button)	Use the Up/Down buttons to move the selected profile to the
		top of the list or to the bottom. When in the Network screen,
	Down (button)
	Down (button)	the TEW-603PI attempts to connect to the network at the top of

		this
		list first

The SiteSurvey Screen

Use the SiteSurvey screen to scan for available networks in your vicinity.

23

Image 23

TRENDnet TEW-603PI manual The SiteSurvey Screen

Contents

Page IMPORTANT NOTE FCC Radiation Exposure Statement Federal Communication Commission Interference StatementCE Mark Warning Configuring Wireless Security Table of ContentsHardware and Wireless Utility Exploring the Wireless Client Utility ScreensGetting Started with the TEW-603PI System Requirement Hardware and Wireless UtilityAbout Your Wireless MIMO PCI Adapter Package ContentSide view of the PCI Adapter from bracket Product OutlineWireless MIMO PCI Adapter The Options Screen The Version Screen Overview of the Wireless Client UtilityThe Network Screen The Profile Screen The SiteSurvey Screen 1. Click Profile Working with Profiles3. Type a descriptive name for the profile such as Home or CoffeShop 7. Click Next. The WLAN Security Configuration screen appears 9. Click Next MODIFYING PROFILES 1. Open the Wireless Client Utility and click Profile2. Select the profile you want to modify and click Properties WEP Wired Equivalent Privacy Use static IP below WPA/WPA2WPA-PSK/WPA2-PSK Use DHCPChecking for Available Access Points 1. Open the Wireless Client Utility and click Options Disabling the Wireless Client UtilityPage The Options Screen The Version Screen Exploring the Wireless Client Utility ScreensThe Network Screen The Network Screen The Profile Screen The SiteSurvey ScreenSecurity ” Shows the current network IP address The Profile Screen The SiteSurvey Screen DETAILED INFO. SCREEN The Options Screen The Version Screen Configuring Security Configuring Wireless Security3. Click the Use Static WEP checkbox 2. Click the drop-down arrow at Security Mode and choose WEP1. In the Properties window, click WLAN Security Select the encryption to match your access point 1. Click the drop-down arrow at Security Mode and choose WPA / WPA2 CONFIGURING WPA & WPA2Refer to the following to configure WPA / WPA2 CONFIGURING WPA-PSK & WPA2-PSK 4. Type in a unique User ID and Password under User Information Check this box if your network requires user certification and CONFIGURING 802.1X - EAP-TLS Glossary TEMPORAL KEY INTEGRITY PROTOCOL TKIP USER AUTHENTICATIONSSID Appendix MaintenanceSee “Maintenance” See “Troubleshooting” 3. Click Next in the Choose Destination Location screen Adapter - UninstallCORRECTIVE ACTION TroubleshootingPROBLEM PROBLEMThe TEW-603PI Problems Communicating With Other ComputersPROBLEM CORRECTIVE ACTIONAd-Hoc IBSS Verify that the peer computers is turned on Limited Warranty OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD